Advertisement
avatar: mether17
mether17
1 posts
Replied to mether17's post on January 10th, 2013

I have received an error code 50 indicating that the battery voltage is out of range. This does not appear to be covered in the manual and I am not sure how to fix this problem.  Any insight would be great.

 

Thanks,

 

Adam

avatar: mlaci
mlaci
16 posts
Replied to mether17's post on February 6th, 2013

On the main board (right side of the GC) there is a battery. The type is CR2032. Try to change it!

Regards,

Laszlo

avatar: mlaci
mlaci
16 posts
Replied to mether17's post on February 6th, 2013

Hello,

There is a battery (CR2032) on the main board. It is on the right side of the GC. Try to change it. It is easy.

Regards,

Laszlo

avatar: Samantha
Samantha
4 posts
Replied to mlaci's post on August 6th, 2015

Hi, I got the same error message on my GC Varian 3900. I think changing the battery can fix it. Would you mind telling me how to locate the main board? Do I need a service technician to do that?

Thank you very much,

Samantha

avatar: mlaci
mlaci
16 posts
Replied to Samantha's post on August 9th, 2015

Dear Samantha,

Yes, I think You can do that. 

Kind regards,

avatar: jimoh
jimoh
1 posts
Replied to mether17's post on December 7th, 2015

please, how can i contant the 430-GC Bruker rep. in nigeria because am have error code 50 (Battery out of range ) and how can i correct it.   here is my Email.     jimohkamaldeen@yamil.com

avatar: mlaci
mlaci
16 posts
Replied to mether17's post on December 9th, 2015

Hello, I sent a document to You. Hope it will help.

avatar: ianf
ianf
1 posts
Replied to mlaci's post on December 29th, 2015

hi mlaci, could you also please send to me We're also having battery failure issues with our Varian 3900.

Thanks,

Ian

avatar: ludovic
ludovic
3 posts
Replied to Samantha's post on May 3rd, 2016

Hi Samantha,

I ve got the same error message. Did you fix it?
I can(t for the moment access to my 3900GC mainboard, do you have any special procedure to access to the CR2032 battery? 

Thanks a lot.
 

avatar: ludovic
ludovic
3 posts
Replied to Samantha's post on May 3rd, 2016

Hi,

I ve got the same problem but i dont know how to access to the battery location?

Any idea or procedure?

Thanks a lot.

avatar: Samantha
Samantha
4 posts
Replied to mether17's post on May 3rd, 2016

Hi, you have to take the screws out and remove the side panels. There are also some screws on the top with a lot of wires. Unscrew those screws and lift the top up. You will be able to see the motherboard and the battery. Reach over and slide the battery out and replace it. I hope it helps.

avatar: ludovic
ludovic
3 posts
Posted May 3rd, 2016

Many thanks Samantha i will try to do it and try to find a GC900 manual.

Best regards.

Ludovic

avatar: Samantha
Samantha
4 posts
Replied to ludovic's post on May 3rd, 2016

Good luck! You can find the manual on the labwrench site.

avatar: rmoraleso
rmoraleso
4 posts
Replied to mlaci's post on January 11th, 2017

I have already replaced it. It worked for the start up problem of the GC, but still remains the warning of code 50 error. 

avatar: rmoraleso
rmoraleso
4 posts
Replied to Samantha's post on January 12th, 2017

Thank you so much, it did work as you said, it is just a bit unconfortable.

avatar: deepu87
deepu87
5 posts
Replied to mether17's post on June 12th, 2017

deepu87

I have received an error code 50 indicating that the battery voltage is out of range. This does not appear to be covered in the manual and I am not sure how to fix this problem.  Any insight would be great.

 

Thanks,

 

deepu

avatar: deepu87
deepu87
5 posts
Replied to mether17's post on June 12th, 2017

deepu87

I have received an error code 50 indicating that the battery voltage is out of range. This does not appear to be covered in the manual and I am not sure how to fix this problem.  Any insight would be great.

 

Thanks,

 

deepu

avatar: rmoraleso
rmoraleso
4 posts
Replied to mether17's post on June 12th, 2017
Hi, Adam. You must replace the battery. It is placed inside the chromatograph. It is a coin like battery
avatar: rmoraleso
rmoraleso
4 posts
Replied to mether17's post on June 12th, 2017
The battery spec is CR2032 lithium battery 3V
avatar: MWC
MWC
1 posts
Replied to rmoraleso's post on November 7th, 2019

Hi,  Yeah we replaced the battery - but the warning code of 50 error keeps coming up - must we reset or can someone help?  One other thing is that when we are in the GC, we get to a line that says Fault time = 0, Battery Voltage out of range - tried to change this but it did not work!

avatar: james007
james007
7 posts
Replied to MWC's post on November 8th, 2019

Individuals from everywhere throughout the world are attempting to get a Love Calculator. This adding machine informs you concerning your accomplice that what amount does he cherish with you. Any individual can utilize this number cruncher to compute love. These days, a few people don't genuine with their accomplices, in this way, they need to attempt Love Crush Calculator

[url=https://minimodaps.blogspot.com]https://minimodaps.blogspot.com[/url] [url=https://minimodaps.blogspot.com/2019/10/do-you-want-to-find-best.html]https://minimodaps.blogspot.com/2019/10/do-you-want-to-find-best.html[/url]