Shimadzu GC-2010



Since introducing our first Gas Chromatograph over 50 years ago, Shimadzu has set the standard for GC power, speed and precision. Today, the GC-2010, in conjunction with GCsolution Software, is the most powerful gas chromatography analysis system available in the world, delivering faster analysis, reduced downtime, superior reproducibility, and excellent stability.

* This item has been discontinued by the manufacturer.

Programmable Yes
Temperature Range 4 to 450 °C
Detector Flame Thermionic Detector, Flame Photometric Detector, Thermal Conductivity Detector, Flame Ionization Detector
GC System Type Modular
Number of Detectors 4
Depth 530
Height 440
Width 515
Additional Specifications Column Oven          
Temperature Range: (Ambient + 4°C) ~ 450°C (using LCO2 gas: -50°C - 450°C)          
Inner Dimensions and Volume: 280 (W) x 280 (H) x 175 (D) mm, 13.7L          
Temperature accuracy: ±1% of the set temperature in Kelvin unit (calibration at 0.01°C increments)          
Temperature Variation Coefficient: 0.01°C/°C          
Temperature Program Steps: Up to 20 (cooling program possible)          
Programmed rate setting range: -250°C ~ 250°C/min          
Total time for all steps: 9999.99 minutes max.          
Injection Ports          
Temperature Range: Up to 400°C          
Heating Settings: 1°C steps          
No. of units installed simultaneously: Up to 3 units          
Sample injection unit types:      
Split/splitless injection is standard          
Direct (without split) injection unit (option)          
On-column/PTV (programmable temperature vaporizer)injection unit (option)          
Flow Control Unit          
Advanced Flow Controller (AFC)          
Split/splitles injection mode and direct injection mode: Pressure range: 0-970kPa          
Programmable Steps: 7 (Negative pressure step is available)          
Programmed Rate Setting Range: -400 ~ 400kPa/min          
Split Ratio Range: 0 - 9999.9          
Mass Flow Rate Setting Range: 0 - 1200mL/min          
Constant Linear Velocity: Maintains optimum separation at all times          
Available Optional Accessories          
AOC-20i Auto Injector: Direct injection, PTV/LVI, 1 - 250 uL syringes, ambient headspace          
AOC-20s Auto Sampler: 150 1.5mL vials or 96 4mL vials and barcode reader          
Leap Combi-Pal Autosampler: SPME, headspace and micro-titer plate sampling capability          
PY2020D Pyrolyzer: Single or double shot includes autosampler          
Four detectors can be installed simultaneously and individually temperature controlled. Detector gas is electronically controlled by APC (Advanced Pressure Control)          
Detector Type(s): FID, TCD, ECD, FPD, FTD          
Flame Ionization Detector (FID)          
Temperature Range: 450°C max.          
Minimum detected quantity: 3pgC/s (Dodecane)          
Dynamic Range: 107          
Thermal Conductivity Detector (TCD)          
Temperature Range: 400°C max.          
Dynamic Range: 105          
Sensitivity: 20,000 mV - mL/mg (Decane)          
Electron Capture Detector (ECD)          
Temperature Range: 400°C max.          
Minimum detected quantity: 8fg/s          
Dynamic Range: 104          
Flame Photometric Detector (FPD)          
Temperature Range: 350°C max.          
Dynamic Range:      
P: 104          
S: 103          
Minimum detected quantity:      
P: 0.2pgP/s (tributyl phosphate)          
S: 4pgS/s (dodecane thiol)          
Flame Thermionic Detector (FTD)          
(Two types, one for capillary and one for packed. The specifications are the same.)          
Temperature Range: 450°C max.          
Dynamic Range:      
N: 104          
P: 104          
Minimum detected quantity:      
N: 0.2pgN/s (azobenzene)          
P: 0.03pgP/s (malathion)          
Maximum of 2 detectors to keep instrument performance          
Weight and Power Requirements (GC main unit)          
Weight: 30 kg (FID model)          
Power Requirements:      
AC100V/120V 230V          
1800VA (Normal oven type) or          
2600VA (High power oven type), 50/60Hz


Excellent Productivity (Highs-speed GC)          
Demands for improved productivity and more efficiency have increased in recent years. The GC-2010 has been specially designed to address these demands by incorporating the following:          
* Third-generation Advanced Flow Control (AFC) – Supports high-speed analysis at a maximum pressure of 970 kPa and 1200 mL/minute maximum flow rate          
* High-power Oven – Enables cooling from 450° C to 50° C in less than six minutes          
* Rapid Detector Data Sampling Rate – Ensures sharp, accurate peaks          
Together, the GC-2010 can double or even triple the productivity of conventional instruments, making it a leader in high-speed GC.          
Superior Reproducibility          
The GC-2010 is the ideal solution for all applications where reproducibility requirements are critical. Expect superb reproducibility – even for large vapor-volume solvents such as acetone or water. Our AFC features rapid response and temperature correction functions to precisely control pressure and flow. New compensation technology for ambient temperatures provides prolonged stability and the most repeatable retention times.          
Constant Linear Velocity
Maintains optimum flow during temperature programming for the best chromatographic separation. Up to seven pressure ramps with either increasing or decreasing pressure gradients can be used to simplify complex separations.          
Easy Operation          
A number of features enable easy operation for both new and experienced users. These include:          
* Large LCD Screen (G window) – Shows graphically all of the operation of the GC, including the data results, temperature profile, and the chromatogram in progress          
* Self-diagnosis Functionality – Maximizes uptime of the GC system and provides documentation for validation purposes; self-diagnosis functions include septum and insert operating status, temperature sensor check, supplied gas pressure, DC voltage and AD converter.          
* Intuitive Operation with GCsolution (Assistant Bar, Data Explorer, Batch Table Wizard, and more)          
Compact, Highly Sensitive Detectors          
Ideal for a wide range of applications, all detectors (FID, TCD, ECD, FPD, FTD) are conveniently located under the top cover, and each detector incorporates an APC (Advanced Pressure Controller) that permits digital setting of the detector gas flow rate. A Flame Photometric Detector (FPD) provides 4 to 5 times more sensitivity than before, while the ECD delivers ultra-high sensitivity detection at 8fg/s.




Manuals and Resources

Note: We appreciate the support of individuals and companies making their documents and resources available to our community. If you find a document or resource that does not belong please let us know by emailing

Instrument Documents

Picture of Shimadzu GC-2010
Shimadzu Scientific Instruments (SSI) is the American subsidiary of Shimadzu Corporation, headquartered in Kyoto, Japan. Founded in 1875, Shimadzu has...

More about Shimadzu

Visit Shimadzu

Questions and Answers

Recent Question Activity

Ask a Question

Shimadzu GC-2010 configuration lost when changing battery

The GC displayed an error of battery low. Then I have stopped the equipment and restart it again, and the language is now in japanese. We have changed the battery now but need to restore the equipment to the normal operation settings first of all...

hardware problem

2010 Rom ver 1.1120 (0676) Hardware monitor mode. How can it be resolved


column sensor error is displayed in my GC Ms(qp 2010 series). How to resolve the problem? how can i do mainatainance this problem? Plz would you suggest me? or send me link plz/

See all 14 Shimadzu GC-2010 Questions and Answers There are 14 Threads


Member Reviews

There are no threads in Shimadzu GC-2010 Reviews at this time.
Add a Review

Buy it Used!

Used Shimadzu GC-2010 Offerings on LabX

Shimadzu GC-2010 with Dual ECD

Price: Call GenTech


Configuration: Complete System

Shimadzu GC-2010 with Single FID and Split/Splitless Injector

Price: Please Email


Configuration: As Shown

Shimadzu GC-2010 Gas Chromatograph with AOC-20i Auto Injector

Price: 17,999


Configuration: As Shown

Shimadzu GCMS-QP2010 Plus, Gas Chromatograph Mass Spectrometer System

Price: $34,999.00


Configuration: As Shown

Shimadzu GC/MS System (GC-2010, QP-2010S, S/N C703843000xx

Price: 29,500


Configuration: As Shown

Find more results for "Shimadzu GC-2010" on LabX