Advertisement

Pharma Test PTZ AUTO3 EZ

Share:

PTZ AUTO3 EZ

The fully automated PTZ AUTO EZ range is available directly in a 1, 2, 3 or 4 station      
configuration. The PTZ AUTO3 EZ Disintegration Test Instrument is equipped in full compliance with the USP and EP pharmacopoeia requirements and ready to operate 3 automated disintegration baskets independently. A large 320x240 Pixel LCD screen and an alpha-numerical keyboard is used to edit product and test information, such as the disintegration time for each station, bath and media temperature etc. A memory files up to 16 different testing methods.      
     
The built-in heating system uses a silent circulation pump and a heater to pre-heat the outer water and keep the temperature within a tight tolerance; the actual bath temperature is always displayed and measured by an external movable temperature probe inside the water bath.      
     
The overheating protection system includes a pressure gauge to monitor the pump flow, a   
thermo switch and thermo fuse to cut the power supply in case of an electronical fault. This secures automatic shut down of the pump and heater in the event that no water flows detected or the electronical control system fails. A built-in digital safety sensor placed at the end of the heating coil shuts down the heating when temperature exceeds +60° C max. 95°C at the heater.      
     
For easy cleaning and maintenance, the Plexiglas water bath can be easily removed using   
the fast coupling system.
PTZ AUTO3 EZ
Attributes
Additional Specifications Test Station:      
3 independent operate-able stations, holding each 1 PT-MKT or PT- MKT33 basket      
Display:      
LCD Display 320x240 Pixel      
Test Station: 3 independent operate-able stations, holding each 1 PT-MKT or PT-    
MKT33 basket      
Display: LCD Display 320x240 Pixel      
Keyboard:      
alpha-numerical keyboard and function keys      
OQ information:      
programmable time sequence information to perform OQ test      
Security:      
password protected instrument calibration and validation procedures      
Stroke Frequency:      
30 strokes / minute      
Accuracy:      
± 1 stroke      
Stroke Height:      
55 mm      
Accuracy:      
± 1 mm      
Basket Lift:      
rises the baskets out of the media at end of test run      
Thermostat:      
built-in 1000 W heating tube and circulation pump Temperature adjustable within 25°- 45.0° C      
Accuracy:      
± 0.3° C      
Safety System:      
pressure switch to protect the heater from overheating (no flow - no      
heating - no pumping)      
thermo switch and thermo fuse to protect the heating system in case of      
an electronic fault      
Memory:      
up to 16 different test descriptive methods      
Printout:      
online printing of test report including individual disintegration times,      
statistics and graphics      
Interface:      
RS-232 port      
Parallel PCL Printer port      
USB adapter for both available as option

Features

  • alpha-numerical keyboard      
  • 320x240 Pixel large LC Display      
  • Test Information Filing up to 16 Methods     
  • Individual start up for each station      
  • Media Temperature measuring in each vessel      
  • USP and EP compliant PT-MKT baskets      
  • USP and EP PT-MKT33 baskets optional      
  • Print out of Run-Time Log at end of test      
  • Print out of Test Report incl. Statistics and Graphics      
  • OQ/PQ information system      
  • Manual Stop of Disintegration Times, press relevant key only, results are marked “M”      
  • Automated detection of the Disintegration Time of each Sample, results are marked      
    “A”      
  • RS-232 interface, parallel Printer Interface - USB adapter option      
  • ABS Auto-Basket-Stop at highest position by built-in Basket Lift      
  • TSC system (Thermostat Safety Control system)      
  • Control by 21CFR part 11 compliant Software PTZ32, alternatively standard software      
    package
  • Photos

    Fully Automated Tablet Disintegration Testing - Type PTZ AUTO 3EZ

    Fully Automated Tablet Disintegration Testing - Type PTZ AUTO 3EZ

    Manuals and Resources

    Note: We appreciate the support of individuals and companies making their documents and resources available to our community. If you find a document or resource that does not belong please let us know by emailing info@labwrench.com

    Instrument Documents

    Picture of Pharma Test PTZ AUTO3 EZ
    Pharma Test is now a household name in the field of pharmaceutical product testing. The company was founded over 30 years ago by Franz J. Fähler...

    More about Pharma Test

    Visit Pharma Test

    Questions and Answers

    Recent Question Activity

    Be the first to Ask a Question

    Reviews

    Member Reviews

    There are no threads in Pharma Test PTZ AUTO3 EZ Reviews at this time.
    Add a Review

    Buy it Used!

    Used Pharma Test PTZ AUTO3 EZ Offerings on LabX

    Advertisement