Advertisement

So-Low General Purpose Laboratory Incubators

Share:

General Purpose Laboratory Incubators

General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.

Models

SMI2
Attributes

Edit Model

Depth 37 cm
Height 38 cm
Width 38 cm
Weight 125 lbs
Additional Specifications Product Specifications

General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled.
  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior Outlet
  • Heated Outer Door (GI Series Only)
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior (GI Series Only)
  • UL Approval
  • 24 Month Limited Warranty

    Features

    Capacity: 1.9 cu.ft.
    Interior Dimensions WxDxH (cm): 38 x 37 x 38
    Temperature Range: 8°C above ambient to 70°C
    Temperature Uniformity: +/-0.35°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 450W; Amps:4.5A
    Jacket Type: Air
    Shelving: 2 Supplied (6 Maximum)
    Access Port: Yes
    Interior Outlet: One
  • SMI6
    Attributes

    Edit Model

    Depth 69 cm
    Height 96 cm
    Width 64 cm
    Weight 185 lbs
    Additional Specifications Product Specifications

    General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled.
  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior Outlet
  • Heated Outer Door (GI Series Only)
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior (GI Series Only)
  • UL Approval
  • 24 Month Limited Warranty

    Features

    Capacity: 6.0 cu.ft.
    Interior Dimensions WxDxH (cm): 49 x 51 x 66
    Temperature Range: 8°C above ambient to 70°C
    Temperature Uniformity: +/-0.35°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 700W; Amps:4.5A
    Jacket Type: Air
    Shelving: 3 Supplied (12 Maximum)
    Access Port: Yes
    Interior Outlet: One
  • SMI7
    Attributes

    Edit Model

    Depth 78 cm
    Height 81 cm
    Width 76 cm
    Weight 195 lbs
    Additional Specifications Product Specifications

    General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled.
  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior Outlet
  • Heated Outer Door (GI Series Only)
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior (GI Series Only)
  • UL Approval
  • 24 Month Limited Warranty

    Features

    Capacity: 6.7 cu.ft.
    Interior Dimensions WxDxH (cm): 61 x 61 x 51
    Temperature Range: 8°C above ambient to 70°C
    Temperature Uniformity: +/-0.35°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 650W; Amps: 4.5A
    Jacket Type: Air
    Shelving: 2 Supplied (9 Maximum)
    Access Port: Yes
    Interior Outlet: One
  • SMI11
    Attributes

    Edit Model

    Depth 68 cm
    Height 96 cm
    Width 106 cm
    Additional Specifications Product Specifications

    Model SMI11 General Purpose Incubator, Single Chamber With Side By Side Doors, 11.25 Cu.Ft.

    General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

    This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded.

    The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. Features include:
  • Microprocessor Control
  • Temperture Sensitivity +/- 0.1C
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior Outlet
  • Heated Outer Door (GI Series Only)
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior (GI Series Only)
  • Stainless Steel Shelves
  • UL Approval
  • 24 Month Limited Warranty

    Features

    Capacity: 11.3 cu.ft.
    Interior Dimensions WxDxH (cm): 91 x 51 x 69
    Temperature Range: Ambient +8 to 70°C
    Temperature Uniformity: +/-0.35°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 850W; Amps: 5.9A
    Jacket Type: Air
    Shelving: 6 Supplied (12 Maximum)
    Access Port: Yes
    Interior Outlet: One
  • SMI12
    Attributes

    Edit Model

    Depth 69 cm
    Height 193 cm
    Width 64 cm
    Weight 425 lbs
    Additional Specifications Product Specifications

    General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled.
  • Microprocessor Control
  • Independent Overtemperature Thermostat
  • Unique Warm Air Jacket Design
  • Interior Outlet
  • Heated Outer Door (GI Series Only)
  • Viewing Door
  • Small Foot Print
  • Stainless Steel Interior (GI Series Only)
  • UL Approval
  • 24 Month Limited Warranty

    Features

    Capacity: 12 cu.ft.
    Interior Dimensions WxDxH (cm): 51 x 51 x 66
    Temperature Range: 8°C above ambient to 70°C
    Temperature Uniformity: +/-0.35°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 650W; Amps: 5A
    Jacket Type: Air
    Shelving: 6 Supplied (24 Maximum)
    Access Port: Yes
    Interior Outlet: One each
  • SMI31
    Attributes

    Edit Model

    Depth 82 cm
    Height 186 cm
    Width 96 cm
    Weight 600 lbs
    Additional Specifications Product Specifications

    General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled.
  • Microprocessor Control
  • Viewing Window
  • Roller Bottle Apparatus Accommodation
  • Interior Outlet
  • Powder Coated White Interior
  • Six Shelves
  • Access Port
  • 24 Month Limited Warranty

    Features

    Capacity: 31.8 cu.ft.
    Interior Dimensions WxDxH (cm): 84 x 66 x 163
    Temperature Range: 8°C above ambient to 70°C
    Temperature Uniformity: +/-0.8°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 1485W; Amps: 8.5A
    Access Port: One
    Shelving: 6 Supplied (16 Maximum)
    Interior Outlet: Four
  • SMI39
    Attributes

    Edit Model

    Depth 83 cm
    Height 229 cm
    Width 105 cm
    Weight 625 lbs
    Additional Specifications Product Specifications

    General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled.
  • Microprocessor Control
  • Viewing Window
  • Roller Bottle Apparatus Accommodation
  • Interior Outlet
  • Powder Coated White Interior
  • Six Shelves
  • Access Port
  • 24 Month Limited Warranty

    Features

    Capacity: 40 cu.ft.
    Interior Dimensions WxDxH (cm): 89 x 66 x 193
    Temperature Range: 8°C above ambient to 70°C
    Temperature Uniformity: +/-0.8°C at 37°C
    Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 1650W; Amps: 12.5A
    Access Port: Available Option
    Shelving: 6 Supplied (20 Maximum)
    Interior Outlet: Four
  • Features

    • Degree of Uniformity 
    • Tripple Wall Construction 
    • Unique Design 
    • Ensure Heating Uniformity 
    • One Year Warranty

    Photos

    • SMI2
    • SMI6
    • SMI7
    • SMI11
    • SMI12
    • SMI31
    • SMI39
    SMI2

    SMI2

    Manuals and Resources

    Note: We appreciate the support of individuals and companies making their documents and resources available to our community. If you find a document or resource that does not belong please let us know by emailing info@labwrench.com

    Picture of So-Low General Purpose Laboratory Incubators
    Since 1959, So-Low has manufactured Ultra-Low Temperature Freezers for both the Medical and Industrial markets. We also supply standard freezers, refrigerators...

    More about So-Low

    Visit So-Low

    Questions and Answers

    Recent Question Activity

    Be the first to Ask a Question

    Reviews

    Member Reviews

    There are no threads in So-Low General Purpose Laboratory Incubators Reviews at this time.
    Add a Review

    Advertisement