Labconco CentriVap Cold Trap

Share:

CentriVap Cold Trap

The CentriVap Cold Trap collects evaporated liquid from a CentriVap Concentrator, protecting an accessory vacuum pump from very low freezing point liquids. Exclusive features include: brushed, stainless steel and glacier white, epoxy-coated steel exterior with blue accents; and temperature graph that illuminates green when collector coil reaches operating temperature. Other features include: HCFC-free refrigeration system with two 1/3 hp compressors lowers cold trap to lowest temperature (depending on model) in less than 30/40 minutes; four-liter, stainless steel collector; acrylic lid with two Quick-Disconnect fittings for connection to a CentriVap Concentrator; stainless steel drain port with corrosion-resistant, nylon valve; grounding clip; and ON/OFF power switch.

Models

-105°C Cold Trap
Attributes

Edit Model

Construction Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents. Stainless steel drain port with nylon valve. Grounding clip.
Depth 23.9 in
Height 17.6 in
Width 24.1 in
Power Requirements 115 volts, 60 Hz, Schuko, North America 230 volts, British (UK), China/Australia
Weight 105 lbs
Additional Specifications Refrigeration: HCFC/CFC-free refrigeration system with two 1/3 hp compressors
Time to reach low temperature: -105° C (-157° F) in less than 40 minutes
Collector: 4-liter stainless steel
Lid: Acrylic lid with two Quick-Disconnect fittings for 1/2" ID hose, rubber gasket and insulating cover
Temperature display: Temperature graph that illuminates green when the collector
coil reaches operating temperature of -40° C (-40° F)
Controls: ON/OFF power switch
Shipping Weight: 170 lbs
Certifications: ETL & ETL-C listings on 115 volt models. CE mark on 230 volt, 50 Hz models.
Ultra-Low Cold Trap
Attributes

Edit Model

Construction Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents. Stainless steel drain port with nylon valve. Grounding clip.
Depth 22 in
Height 20.9 in
Width 14.5 in
Power Requirements 115 volts, 60 Hz, Schuko, North America 230 volts, British (UK), China/Australia
Weight 135 lbs
Additional Specifications Refrigeration: HCFC/CFC-free refrigeration system with two 1/3 hp compressors
Time to reach low temperature: -85° C (-121° F) in less than 40 minutes
Collector: 4-liter stainless steel
Lid: Acrylic lid with two Quick-Disconnect fittings for 1/2" ID hose, rubber gasket and insulating cover
Temperature display: Temperature graph that illuminates green when the collector coil reaches operating temperature of -65° C (-85° F).
Controls: ON/OFF power switch
Certifications: ETL & ETL-C listings on 115 volt models. CE mark on 230 volt, 50 Hz models.
Shipping weight: 142 lbs
Cold Trap
Attributes

Edit Model

Depth 24.2 in
Height 13.8 in
Width 14.5 in
Weight 70 lbs
Additional Specifications Refrigeration: HCFC/CFC-free refrigeration system with 1/3 hp compressor
Time to reach low temperature: -50° C (-58° F) in less than 30 minutes
Construction: Brushed stainless steel and glacier white, epoxy-coated steel
exterior with blue accents. Stainless steel drain port with nylon valve. Grounding clip.
Collector: 4-liter stainless steel
Lid: Acrylic lid with two Quick-Disconnect fittings for 1/2" ID hose, rubber gasket and insulating cover
Temperature display: Temperature graph that illuminates green when the collector
coil reaches operating temperature of -40° C (-40° F).
Controls: ON/OFF power switch
Certifications: ETL & ETL-C listings on 115 volt models. CE mark on 230 volt, 50 Hz models.
Shipping weight: 80 lbs
Power Supply:
115 volts, 60 Hz
Schuko
North America, 230 volts
British (UK)
China/Australia

Features

  • HCFC-free refrigeration system: Has a high capacity 1/3 hp compressor to lower cold trap temperature to -50° C (-58º F) in less than 30 minutes and accelerate start up procedures. The Ultra-Low Cold Traps have two compressors to lower cold trap temperature to -85° C (-121° F) in less than 40 minutes. The -105 Cold Traps have two compressors to lower cold trap temperature to -105 (-157° F) in less than 40 minutes.
  • Reliability guarantee: Full one year warranty is provided against defects in materials and workmanship.
  • Acrylic lid: Has two Quick-Disconnect fittings for 1/2" ID hose for connecting the Cold Trap and Concentrator.
  • Four liter stainless steel collector: Holds up to four liters of liquid and accommodates an optional Glass Insert 7397605 for use with corrosives.
  • Temperature graph: Displays relative collector coil temperature. Green LED lights indicate conditions are right for beginning a process.
  • Sleek styling: Brushed stainless steel front panel and blue accents enhance appearance.
  • International electrical configuration available: The 230 volt, 50 Hz models conform to the CE (European Community) requirements for electrical safety and electromagnetic compatibility. Other voltages available.
  • Collector drain: Corrosion-resistant nylon valve and stainless steel plumbing speed clean up and eliminate need for glass insert with non-corrosives.
  • Optional Secondary Chemical Traps: Trap Inserts for removing acids, moisture, radiochemicals and solvents minimize release of contaminants into the atmosphere.

Photos

  • -105°C Cold Trap
  • Ultra-Low Cold Trap
  • Cold Trap
-105°C Cold Trap

-105°C Cold Trap

Manuals and Resources

Note: We appreciate the support of individuals and companies making their documents and resources available to our community. If you find a document or resource that does not belong please let us know by emailing info@labwrench.com

Instrument Documents

Picture of Labconco CentriVap Cold Trap
Labconco Corporation, or Laboratory Construction Company as it was first named, was founded in 1925 by Ralph Callaway and Phil Goldfisch. The company's...

More about Labconco

Visit Labconco