have a 42R with blank display. installed new display board. Unit worked for 3 hours just fine. Now display just shows blue. After turning power off then on, display comes on then turns blue. What do you think? Thanks Mike
- 0 Replies
- Post a Reply
Attributes | |
---|---|
This model was added by: LabWrenchEditor |
|
Shaking Speed | 25 to 400 rpm, with 3/4 |
Temperature Accuracy | .1 °C at 37°C, with a nominal uniformity of ± 0.25°C |
Depth | 29.7 in |
Height | 32.2 in |
Width | 25 in |
Power Requirements | 120V 60 Hz; 230V 50 Hz; 100V 60 Hz; 100V 50 Hz |
Weight | 216 lbs |
Additional Specifications | Heaters: Low watt-density, resistance-type heaters with high-temperature safety thermostat cut off Drive Mechanism: Triple-eccentric counterbalanced drive in cast-iron housing with 9 permanently lubricated ball bearings. Solid-state brushless D.C. motor Safety: Sensors limit speed when shaker is unbalanced, stops shaker when excess vibration is detected or door opened, and shuts off temperature when high-temp. limit is exceeded Computer Interface: RS-232 for data logging and control using laboratory management software or HyperTerminal Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display) Illumination Chamber: 2 internal 12V, 10 Watt halogen lights illuminate chamber Illumination Photosynthetic: Optional for Model 42R only. Programmable Photosynthetic Light Bank with (6) 15-Watt Gro-Lux lights and an internal on-off switch Ambient Conditions: Temperature: 10°C - 35°C. Humidity: 20% to 80% non-condensing |
Attributes | |
---|---|
This model was added by: LabWrenchEditor |
|
Shaking Speed | 25 to 400 rpm, with 3/4 |
Temperature Accuracy | .1 °C at 37°C, with a nominal uniformity of ± 0.25°C |
Depth | 29.7 in |
Height | 32.2 in |
Width | 25 in |
Power Requirements | 120V 60 Hz; 230V 50 Hz; 100V 60 Hz; 100V 50 Hz |
Weight | 266 lbs |
Additional Specifications | Heaters: Low watt-density, resistance-type heaters with high-temperature safety thermostat cut off Drive Mechanism: Triple-eccentric counterbalanced drive in cast-iron housing with 9 permanently lubricated ball bearings. Solid-state brushless D.C. motor Safety: Sensors limit speed when shaker is unbalanced, stops shaker when excess vibration is detected or door opened, and shuts off temperature when high-temp. limit is exceeded Computer Interface: RS-232 for data logging and control using laboratory management software or HyperTerminal Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display) Illumination Chamber: 2 internal 12V, 10 Watt halogen lights illuminate chamber Illumination Photosynthetic: Optional for Model 42R only. Programmable Photosynthetic Light Bank with (6) 15-Watt Gro-Lux lights and an internal on-off switch Ambient Conditions: Temperature: 10°C - 35°C. Humidity: 20% to 80% non-condensing |
Innova_42
Note: We appreciate the support of individuals and companies making their documents and resources available to our community. If you find a document or resource that does not belong please let us know by emailing info@labwrench.com
have a 42R with blank display. installed new display board. Unit worked for 3 hours just fine. Now display just shows blue. After turning power off then on, display comes on then turns blue. What do you think? Thanks Mike
Kindly provide me with a user manual of Innova 42 R from New Brunswick Scientific
Member Reviews
There are no threads in New Brunswick Scientific Innova 42 / 42R Reviews at this time.
Add a Review
Used New Brunswick Scientific Innova 42 / 42R Offerings on LabX