Consider CO2 When Selecting a Lab Incubator | Labwrench eNews | LabWrench

November 17, 2015
Labwrench.com

Featured Video

Cincinnati Sub-Zero Stable Climate II

Cincinnati Sub-Zero product line video for the Stable Climate II stability test chambers.  Watch the video here.

Recently Asked Questions

Varian/Cary 4000/5000/6000i - Single beam mode
What is the single front and single rear option in the setup menu of WinUv software? Though we select single beam mode, there is light on both of the holders. Why? Advise this member.

Beckman Coulter/Optima TL 100 - Temp error message
We have encountered "TEMP" error message blinking on our Beckman Optima Max. At the same time, the temperature is showing app -5.0C. Checked the chamber temperature sensor and it's app 840 ohm and it should be PTC1000 type sensor. Is there a problem with the temperature sensor? The instruction manual indicates that it could be something related to the brake. May I have the circuit diagram or service manual for it? Advise this member.

Bruker Corporation/SCION Series - GC-MS baseline
I would like to know, what causes a high baseline peak in GC-MS chromatograms? As well, I am constantly experiencing a lot of noise even after I cleaned the ion-source, cut the column, changed my filter, my inlet liner and checked the water and air which reported to be good. Advise this member.

Click here to view all Questions and Discussions on LabWrench.

Buy It Used

Brunswick Excella 24R Bench Top Incubator (Refrigerated) Shaker

 The benchtop Excella E24R (incubated/Refrigerated) shaker provides superior performance and advanced features at an affordable price. A wide variety of platforms, clamps and test tube racks provide for virtually unlimited flexibility. The Excella E24 offers field calibration of temperature and speed through the microprocessor-controlled touch pad. The Excella 24 is simply the best performing biological shaker in it's price class.

Contact J&M Scientific for More Information

Product of Interest

Smart Sample Loading System from Rigaku


Smart Sample Loading SystemSmart Sample Loading System (SSLS) adds a new dimension of flexibility to the Rigaku ZSX Primus WDXRF spectrometer. A vacuum chuck can be used to load samples into pre-loaded sample holders. This sample loading system has two important consequences: time is saved by the operator since they are no longer required to manually load each sample in a sample cup and the number of samples that can be held on the sample deck is increased significantly.

 
Read more about the Smart Sample Loading System.

Featured Blog

 Consider CO2 When Selecting a Lab Incubator

Incubators have traditionally been a mainstay for most biological and life science laboratories, to grow or sustain biological cultures, reproduce germ colonies or breed/grow insects. The most basic incubators allow researchers to recreate strict temperature conditions for optimal growth, development and/or maintenance of finicky cells. Temperature homogeneity is also critical, as fluctuations in the living environment can be deadly.

Click here to read more from Terra Universal

Have a Question ??

Have a Question?

Company News Hot Off The Press

VACUU•VIEW and VACUU•VIEW extended Vacuum Gauges from BrandTech® Scientific
NEW VACUUBRAND® vacuum gauges feature corrosion resistant transducers for use in laboratory applications. The VACUU•VIEW model has a capacitive transducer for absolute pressure readings from atmosphere to 0.1 mbar/hPa (0.075 Torr) with user-selectable units. The VACUU•VIEW extended switches automatically between capacitive and a ceramic sheathed Pirani transducers for readings to 10-3 Torr/mbar/hPa. Read more.

Ziath Launches New Camera-Based Scanner for More Effective Sample Management
Ziath, the leading expert in sample tracking solutions for use in laboratories and biobanks, has today released the DataPaq™ Cube reader. Utilising a dual camera set-up and unique cuboid design, it provides users with a fast and flexible system for scanning 2D barcoded tubes housed in both SBS and cryobox formats, all using a single device. Read more.

New data underlines the value of the FT4 Powder Rheometer for roller compaction process optimisation
A joint study carried out by Freeman Technology and Gerteis Maschinen + Processengineering AG, a leading provider of roller compactors, provides examples of how the FT4 Powder Rheometer® can be used for fast and effective process optimisation and efficient manufacture. Read more.

 Click here to view all news articles on LabWrench.

Sponsor of the Week

Thank you to BINDER for sponsoring the Incubators categories on LabWrench

 BINDER temperature, climate, and environmental simulation chambers are the centerpieces of modern laboratories. Designed to meet the highest demands in scientific and industrial fields, they enable the accurate simulation of biological, chemical, and physical environmental conditions. With cutting-edge technology and pioneering innovations, BINDER develops products that provide real added value for the customer. BINDER applies their expertise and feel for the requirements of dynamic, day-to-day work in research facilities to support the widest range of projects and processes in an optimum way. After all, their aim is nothing less than making a contribution to the health, quality of life, and safety of people.

Visit the BINDER website

View BINDER's products

Upcoming Webinar

The Mathematics of Image Analysis

Thurs. Nov. 19, 2015
10:30 - 11:30 AM 
(GMT-05:00) Eastern
[US & Canada]

 Register Now!

Brought to you by:

Lab Equipment Questions for the Experts

EPPENDORF/Mastercycler ep realplex - Not active
I have a problem with the Eppendorf realplex mastercycler epgradient in our lab. The start program icon is not active (not green) so we can't start the program. Please can you help me to figure it out. Advise this member.

Randox/RX Dayton - Network interface problem
Our interface card won't communicate with the computer anymore. It starts up normal and the green light is lit (ready) . We already changed and tested the computer and cable but there is no problem. Does anyone have suggestions? Does anyone have the interface print board for sale? Advise this member.

Scientific Instrument Services/MASSTransit - Software can't convert
System reads: "You may alternately consider GC/MS File Translator, although that does not support Shimadzu.qgd files and "library" formats (.L, .JCAMP, .LBR, .IDB, etc.)." Does it mean that this software can't convert from the Shimadzu.qgd data and Shimadzu library? Advise this member.

Click here to view all Questions and Discussions on LabWrench.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Links to CATEGORY PAGES on LabWrench

Atomic Absorption

Centrifuge

Clinical Chemistry Analyzers

Evaporators Concentrators

Fume Hoods

GC Systems

Hematology Analyzers

HPLC Systems

Microplate Readers

PCR Thermal Cyclers

Shakers

UV / VIS Spectrophotometers

 

For editorial and sales inquiries contact us:

LabWrench.com
c/o LabX Media Group Inc.
PO Box 216, 476 Bay Street,
Midland, Ontario, Canada   L4R 1K9
Ph: 888-781-0328 | www.labwrench.com