Leica Microsystems - RM2255

Manufactured by  Leica Microsystems
Follow this Equipment

Fully Automated Rotary Microtome

Reduce repetitive motions that can contribute to musculoskeletal disorders with the powerful, fully automated Leica RM2255 rotary microtome.    
    
Designed for fully motorized sectioning of both paraffin- and resin-embedded specimens, the Leica RM2255 supports a broad spectrum of applications; in routine and research laboratories; in histology; in industrial materials and quality control.    
    
Its two-in-one design concept, which allows motorized and manual sectioning, provides reproducible high-quality sections.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

Microtomes Service ProvidersView All (9)

Request Support
Features of RM2255

Consistent sectioning speed     Consistent sectioning speed and force of the fully-automated cutting motor supports consistent, high-quality sectioning and helps to reduce musculoskeletal disorders caused by repetitive motion.    

Precision orientation system     The optional 8° X/Y precision orientation system with calibrated controls helps to quickly orient already cut specimens (re-cuts). The system then rapidly returns the exact zero position, which is marked by two red indicators.    

Large 70mm vertical stroke     The large 70mm vertical stroke allows sectioning of super mega cassettes and also supports safer specimen changing due to the greater distance to the knife edge.    

Unencumbered work area     Fewer clamping levers provide an unencumbered work area.

General Specifications
Max. Specimen Size50L x 60H x 40W mm
Microtome TypeRotary
Sectioning Speed0.5 to 420 mm/s
Thickness Setting0.5 to 100 µm
Depth 618 mm (including waste tray)
Height305 mm (with storage area on cover)
Width 413 mm (including hand wheel)
Power Requirements 100 / 120 / 230 / 240 V AC ±10%, 50/60 Hz
Peak Power340 VA
Weight81 lbs (without accessories)
Additional Specifications

Section thickness    
Setting values:     
from 0,5 Μm – 5 Μm in 0,5 Μm-increments    
from 5 – 20 Μm in 1 Μm-increments    
from 20 – 60 Μm in 5 Μm-increments    
from 60 –100 Μm in 10 Μm-increments    
Trimming section thickness setting range: 1 – 600 Μm    
Setting values:     
from 1 – 10 Μm in 1 Μm-increments    
from 10 – 20 Μm in 2 Μm-increments    
from 20 – 50 Μm in 5 Μm-increments    
from 50 – 100 Μm in 10 Μm-increments    
Object feed: 28 mm ±1 mm, feed motion via    
step motor    
Vertical specimen stroke: 70 mm    
Sectioning modes: 4    
Specimen retraction:    
in manual operation: 5 – 100 Μm in 5 Μm-increments,    
can be turned off    
in motorized operation: varying with the sectioning    
speed, can be turned off    
Electric coarse feed: 300 Μm/s und 900 Μm/s    
Specimen orientation: horizontal: 8°, vertical: 8°

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com