Setaram Instrumentation - microDSC7 evo
Manufactured by Setaram Instrumentation
High-sensitivity DSC and microcalorimetry (-45 to 120°C)
Featuring the exclusive "3D Calvet Sensor Inside" Technology, the ΜDSC7 evo microcalorimeter is designed for the study of samples (denaturation, transition, gelifi cation, reaction, etc.) in isothermal and scanning mode (no external cooling system is needed) over a wide temperature range (–45 to 120°C).
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of microDSC7 evo
- Wide operating temperature range (from -45 °C to 120 °C): cooling of the calorimeter does not require an external source.
- Use in isothermal or temperature programming (DSC) mode.
- Possibility to study samples in all forms: liquids, gel, powder, solid.
- Variety of closed and removable experimental cells.
- DSC measurements under very high pressure (up to 1000 bars):with the use of specific high pressure gas panel and cells.
General Specifications
| Cooling Rate | 0.001 to 2 °C/min |
| DSC Type | Heat Flux DSC |
| Temperature Range | -45 to 120 °C |
| Heating Rate | 0.001 to 2 °C/min |
| Power Requirements | 230 V / 50/60 Hz |
| Weight | 82.5 lbs |
Additional Specifications
Temperature range:
-45°C to 120°C (Cooling under 0°C requires the use of an auxiliary thermostat)
Programmable temperature scanning rate (heating and cooling):
0.001 to 2 C.min-1
RMS Noise:
0.4 µW
Resolution:
0.02 µW / 0.002 µW
Cells:
1 ml, made of Hastelloy C - Removable Batch, mixing batch, ampoule and high pressure
Pressure (measured & controlled):
400 bar / 5800 psi or 1000 bar / 14 600 psi requires the use of high pressure cells and gas panel
Dimensions:
40 / 53 / 58 cm (15.7 / 20.9 / 22.8 in)