Setaram Instrumentation - SENSYS evo DSC
An innovative line of Thermal Analyzers (-120 / 830°C) with 3D-Inside technology
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of SENSYS evo DSC
- Accurate enthalpy measurements
- Cp measurements within a 1 %
- Unequalled adsorption and TPD measurements
- Robotic DSC with 48 samples, even under pressure
- TG-DSC option
- Coupling to gas analysis (BET, gas sorption, FTIR, MS)
- Calisto software
General Specifications
| Cooling Rate | 0.01 to 30 °C/min |
| Depth | 22.8 |
| DSC Type | Heat Flux DSC |
| Height | 17.7 |
| Temperature Range | 28 to 830 °C |
| Width | 20.9 |
| Heating Rate | 0.01 to 30 °C/min |
| Power Requirements | 230 V - 50/60 Hz |
| Weight | 99 lbs |
Additional Specifications
Temperature range:
Ambient to 830 °C
With cooling accessory:
-120 °C to 200 °C (Liquid Nitrogen Accessory)
Temperature accuracy:
+/-0.1 °C
Temperature precision:
+/-0.02 °C
Programmable temperature scanning rate(heating and cooling):
0.01 to 30 °C.min-1
Cooling time:
17 min (from 50 °C to -100 °C) with Liquid Nitrogen Accessory
Enthalpy accuracy:
+/-1 %
Calorimetric Precision:
+/-0.1 %
RMS Noise:
0.2 ΜW
Sensitivity (Joule effect at 30°C):
6.7 ΜV/mW
Resolution:
0.35 ΜW / 0.035 ΜW
Dynamic range:
+/- 2500 mW
Autosampler:
48 samples even under pressure
Gases:
3 carrier gases(MFC from 4 to 200 ml/min) + 1 auxiliary or reactive gas (MFC from 0.3 to 16 ml/min)
Crucibles:
120 Μl, 160 Μl, 320 Μl - aluminium, incoloy, gold plated incoloy, graphite,alumina, platinum, etc.
Pressure (non controlled):
High Pressure Crucible -(up to 500 bars / 7250 psi at 600 °C)
Pressure (measured & controlled):
High Pressure Crucible -(up to 400 bars / 5800 psi at 600 °C)