Torrey Pines Scientific - HP40 and HS40
When you cannot be in two places at once, these equipment are ideal for complete walk-away heating and stirring applications.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Magnetic Stirrers Service ProvidersView All (3)
Documents & Manuals
There are no Documents or Manuals available.
Features of HP40 and HS40
- 10-program memory stored in CMOS. No batteries required
- Each program can be 10 steps, where each step includes a temperature, stirring speed, time and heating rate
- Repeat any program 1–98 times automatically. Infinite repeats settable
- Programmable and non-programmable operation
- Platinum RTD temperature measurement for ±1% accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
- Milled-flat cast aluminum top available for use with solids on the plate surface (HP40A and HS40A)
- Temperature ramping for exact heating and cooling rates
- PID temperature control to 1°C on plate surface or solution with accessory probe
- Stir up to 4 liters of aqueous solutions from 100–1500 rpm (HS40 and HS40A)
- Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
- Electronic calibration stored in CMOS
- RS232 interface for control or recording data on a computer
- Custom display of all parameters all the time
- 12-month warranty
- UL, CSA and CE compliant
General Specifications
There are no General Specifications available.
Additional Specifications
Programming
Memory capacity:
10 programs
Individual Program Capacity:
10 steps
Repeat a program automatically:
1 to 98 times or infinitely
Temperature Measurement
Platinum RTD:
100 ohm at zero in plate and in probe
Range:
0–450°C on ceramic plate; 0–400°C on aluminum plate
Readability: 1°C
Hot Plate
Dimensions:
8” (20.3 cm) x 8” (20.3 cm)
Maximum plate temperature:
Ceramic: 450°C
Aluminum: 400°C
Temperature control type:
PID
Temperature accuracy:
1% ±
Temp stability:
1°C
Heater power in watts:
600 watts
Stirrer
Readability:
1 rpm
Settability:
nearest 10 rpm
Electrical
Fused:
both high and neutral lines
Line cord:
Detachable, 6 foot (1.8 meter), three-wire grounded
Dimensions
Dimensions packed
Length:
18.25” (46.36 cm)
Height:
9.5” (24.13 cm)
Width:
12.25” (31.12 cm)
Weight packed for shipment:
14 lbs (6.3 kg)
Series Modals
Torrey Pines Scientific - HP40
[+] View Model SpecificationsDepth | 15.75 in |
Height | 4.75 in |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Peak Power | 600 W |
Weight | 12 lbs |
Shipping Weight | 14 lbs |
Top Plate Construction | Ceramic |
Additional Model Specifications |
Torrey Pines Scientific - HP40A
[+] View Model SpecificationsDepth | 15.75 in |
Height | 4.75 in |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Peak Power | 600 W |
Weight | 13 lbs |
Shipping Weight | 15 lbs |
Top Plate Construction | Aluminum |
Additional Model Specifications |
Torrey Pines Scientific - HS40
[+] View Model SpecificationsDepth | 15.75 in |
Magnetic Stirrer Type | Hot Plate Stirrer |
Height | 4.75 in |
Maximum Stirring Quantity | 2 L |
Maximum Stirring Speed | 1500 rpm |
Stirring Position | Single Position |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Stirring Speed Range | 100 to 1500 rpm |
Peak Power | 600 W |
Weight | 12 lbs |
Shipping Weight | 14 lbs |
Number of Stirring Positions | 1 |
Top Plate Material | Ceramic |
Additional Model Specifications |
Torrey Pines Scientific - HS40A
[+] View Model SpecificationsDepth | 15.75 in |
Magnetic Stirrer Type | Hot Plate Stirrer |
Height | 4.75 in |
Maximum Stirring Quantity | 2 L |
Maximum Stirring Speed | 1500 rpm |
Stirring Position | Single Position |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Stirring Speed Range | 100 to 1500 rpm |
Peak Power | 600 W |
Weight | 13 lbs |
Shipping Weight | 15 lbs |
Number of Stirring Positions | 1 |
Top Plate Material | Aluminum |
Additional Model Specifications |