CDS Analytical - Pyroprobe 5000 Series
Manufactured by CDS Analytical
The CDS Pyroprobe® Model 5000 is the most advanced thermal sample preparation instrument available. Platinum filaments...
The CDS Pyroprobe® Model 5000 is the most advanced thermal sample preparation instrument available. Platinum filaments are rapidly heated for pulse pyrolysis work, or slowly heated with controlled rates for programmed analyses. Set temperatures in 1°C increments to 1400°C for a wide heating range and more precise pyrolysis temperatures. Analytical runs may be programmed for up to eight steps per sample, with automatic control of the on-line valve, interface temperature, GC ready sensing and GC start for each step. When configured with the trapping option, the Pyroprobe® may be used to collect analytes from slow rate pyrolysis, thermal desorption or reactant gas pyrolysis. The unique interfacing design permits a direct pyrolysis path to the GC inlet or rapid sample heating and transfer to the trap without interrupting the pneumatics of the GC. Simple PC control of all parameters is presented in an easy to program window, permitting method development, storage, notation and editing.
New! For Model 5150 and 5200 Pyroprobes:
Cryofocusing Option-produces sharper peaks for early eluting compounds.
An injection port mounted device cooled by N2 or CO2.
New! For Model 5150 and 5200 Pyroprobes:
Cryofocusing Option-produces sharper peaks for early eluting compounds.
An injection port mounted device cooled by N2 or CO2.
Active Questions & AnswersAsk a Question
1Replies
Price
Need Equipment Support?
Documents & ManualsView All Documents
Features of Pyroprobe 5000 Series
- Platinum filament pyrolyzer for pulse pyrolysis and multistep, programmed pyrolysis
- Simplified sample loading
- Programmable interface
- Easy transfer line connection to GC
- PC control
- Three modes of operation: run, dry, clean-all user selectable
- Built-in trapping zone for thermal desorption reactant gas operation slow rate pyrolysis with trapping
- Interface directly to GC or to trap
- Specify up to eight runs per sample–automatically
- Window-based CDS 5000 DCI Control
General Specifications
There are no General Specifications available.
Series Modals
CDS Analytical - Model 5000
[+] View Model SpecificationsDepth | 31 cm without interface |
Height | 24 cm without interface |
Width | 23 cm without interface |
Additional Model Specifications | Pulse Pyrolysis Filament Temperature: Programmable in 1°C increments to 1400°C Heating Rates: 0.01 to 20.0°C/ms (10 to 20,000°C/second) Clean and Dry: User selectable Programmed Pyrolysis Heating Rates: 0.01 to 999.9°C/sec and 0.01 to 999.9°C/min Multiple Steps: Each step may include GC start Interface 1500 Valved Interface: Isothermal temp., set in 1°C increments |
CDS Analytical - Model 5150
[+] View Model SpecificationsDepth | 31 cm without interface |
Height | 24 cm without interface |
Width | 23 cm without interface |
Additional Model Specifications | Pulse Pyrolysis Filament Temperature: Programmable in 1°C increments to 1400°C Heating Rates: 0.01 to 20.0°C/ms (10 to 20,000°C/second) Clean and Dry: User selectable Programmed Pyrolysis Heating Rates: 0.01 to 999.9°C/sec and 0.01 to 999.9°C/min Multiple Steps: Each step may include GC start Interface 1500 Valved Interface: Isothermal temp., set in 1°C increments Multiple steps: Each interface step includes initial, ramp and final. Each step may include Pyroprobe® and GC start Interface: Low-mass programmable zone on 5150 unit Temperature: Settable in 1°C/min increments to 350°C Interface Heating Rates: Programmable in 1°C/min increments to 100°C/min Heated Zones: 4 auxiliary zones Valve Oven: Settable in 1°C increments to 350°C Transfer Line: Settable in 1°C increments to 350°C |
CDS Analytical - Model 5200
[+] View Model SpecificationsDepth | 31 cm without interface |
Height | 24 cm without interface |
Width | 23 cm without interface |
Additional Model Specifications | Interface: Pyrolysis to built-in trap or direct to GC Temperature: Settable in 1°C increments to 350°C Trap Heating Rates: 600°C/min Trapping Tube: Ambient to 350°C |