Biotage - Initiator+ SP Wave
No Documents
Microwave Peptide Synthesizer
In peptide synthesizer mode, this is the perfect tool for chemists synthesizing peptides and peptidomimetics, including difficult modifications and labeling of sequences, by using single or multi-step procedures. The intuitive Initiator 4.0 software controls the instrument functions and by using the pre-defined methods synthesis can be started immediately.
Benefit from the ability to perform reactions using microwave irradiation on a small scale. The semi-automated operation also reduces the consumption and waste of expensive reagents which occur in other systems due to priming of the system or use of large dead volumes.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Need Equipment Support?
Documents & Manuals
There are no Documents or Manuals available.
Features of Initiator+ SP Wave
- Microwave assisted peptide and organic synthesis
- Semi-automated
- Disposable 2, 5 and 10 mL PP-reactor vials with PTFE frits
- Synthesis on 5-300 µmol scale
- Large 10” touchscreen
- Inert gas capability
- Easy-to use Initiator 4.0 software
- Use pre-defined methods or define your own
- Vortex mixing in peptide synthesis mode
- Magnetic stirring in organic synthesis mode
- Single robot arm and digital syringe pump
General Specifications
| Depth | 19.7 in |
| Height | 27 in |
| Width | 15.7 in |
| Power Requirements | Europe: 220-240 V~, 50 Hz (5 A) |
| Peak Power | 1100 VA |
| Weight | 72.7 lbs |
Additional Specifications
Heating Process
Temperature range:
40–100 °C
Temperature increase:
Typically 2-5 °C/sec
Pressure range:
Run at atmospheric pressure
Power range:
0.200 W at 2.45 GHz, capped at 60 W during steady state
Reactor vial sizes:
2, 5 and 10 mL
Agitation:
Variable vortex mixer (300-1300 rpm)
Vial volume range:
2 mL reactor vial: 0.8-1.1 mL
5 mL reactor vial: 1.6-3.2 mL
10 mL reactor vial: 3.2-6.4 mL
Inert gas (optional):
Approximately 2 L/min (0.07 cubic feet/min), 2 bar (0.2 MPa; 29 psi)
Liquid Handling
Syringe Pump:
Digital single syringe pump, 11 mL
w. sample loop
Volume range:
10 ΜL to 11 mL (< 1.0% deviation at full stroke)
Flow rate:
1-50 mL/min
Reagent bottle rack:
3 x 100 mL
System solvent:
1 x 2000 mL
Interfaces
Touchscreen:
10.4"
Ethernat LAN:
Complies with IEEE 802.3 (ANSI 8802-3
USB:
USB 2.0
Archiving/back-up:
Via USB
Printing:
Via LAN
System requirements
Temperature:
Operating temperature 18-32 °C
Storage and transportation temperature:
-25 °C to 60 °C
Humidity:
20-95% at room temperature
Vacuum pump:
Minimum partial pressure: 50 mbar
(5 kPa; 0.7 psi)
Flow rate: 30 l/min (1.1 cubic feet/min)