Wilson Hardness - UH250
Universal Hardness Tester
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of UH250
- Special closed-loop system for quick and highlyaccurate test results
- Automatic test cycle with very fast cycle times
- Fully automatic evaluation of the indent
- Integrated zoom module
- Only 1 objective lens (no change of objective lens necessary)
- Easy administration of test programs
General Specifications
Power Requirements | 230V / 50-60Hz |
Weight | 507 lbs |
Additional Specifications
Hardness Scales: Brinell, Vickers, Rockwell, Superficial Rockwell, Knoop and Brinell Depth
Optics: 5 mega-pixel camera
Objectives: Zoom module and autofocus
Display: IPC-touchscreen or PC screen
Standards Compliance: Conforms to ISO 6506, ISO 6507, ISO 6508, ISO 4545, ASTM E18, ASTM E92, ASTM E10 and JIS
Test Load Type: Loadcell closed-loop control system
Test Cycle: Automatic and indent evaluation
Load Range: 1 - 250 kgf
Test Loads: 1, 3, 5, 10, 15, 15.625, 20, 30, 31.25, 50, 60, 62.5, 100, 125, 150, 187.5, 250 kgf
Vickers Test Procedures: HV 1, 2, 3, 5, 10, 20, 30, 50, 100
Rockwell Test Procedures: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V, Bm, Fm, 15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X,30X, 45X, 15Y, 30Y, 45Y, 30 TM, HMR 5/25
Brinell Test Procedures: HB1: 1, 2.5, 5, 10, 30
HB2.5: 6.25, 15.625, 31.25, 62.5, 187.5
HB5: 25, 62.5, 125, 250
HB10: 100, 250
Indenter Types: Brinell Balls: 1, 2.5, 5, 10 mm
Vickers Diamond: 136°
Rockwell Diamond Cone: 120°
Balls: 1/16 in, 1/8 in, 1/4 in, 1/2 in
Load Duration: 0.1 - 255 seconds
Data Output: RS-232, UTP RJ45
Specimen Accommodation: Maximum test height 320 mm, maximum throat 215 mm
Specimen Access: External surfaces
Machine Dimensions: 250 × 620 × 900 mm (9.8 × 24.4 × 35.4 in)