Biocode Hycel - Xenia
No Documents
True quantitative flow cytometer for haematology
The two signals are match in less than 40 µs compare to 170 µs for other manufacturer.
Active Questions & AnswersAsk a Question
Xenia used
Recent Questions & Answers
Updated byLabWrenchSiteAdmin
Hematology Analyzers Service ProvidersView All (1)
Documents & Manuals
There are no Documents or Manuals available.
Features of Xenia
5 part diff
27 Parameters
Approx 60 tests/hour
Programmable automatic rerun
Extended linearity (patented)
Automatic selective bidirectional transfer to the host
No daily maintenance is required
Compressor
Regulated high pressures
Vacuum is constantly monitored and used only in correct conditions: other systems using
stepper motor can loose steps, i.e vacuum, without notice
No risk of blockage with high pressure in front of the aperture (1.2 bar).
Metrology
Absolute volume of the sampling loops onto the Ceramic Shear valve measured at workshop.
High precision syringes
Mechanical mixing of the sample provides excellent homogeneization.
Constant dilution rate are warranted ±2% at 1/250 and 1/6000 for the whole production of instruments
General Specifications
| Power Requirements | 230 V/50 Hz or 115 V/60 Hz |
| Peak Power | 1000 VA |
Additional Specifications
Throughput:
about 60 Tests/hour
Differentiation of WBC:
Lym #, Mon #, Neu #, Bas #, Eos #
Lym %, Mon %, Neu %, Bas %, Eos %
Lx, Ly, Nx, Ny
Measurement:
WBC: Impedance and Laser scattering with double hydrodynamic focusing
Hb: Photometry at 560 nm
RBC, Hct, MCV, MCH, MCHC, RDV-CV, RDV-SD: Impedance with double hydrodynamic focusing
Plt, Pct, MPV, PDW, by impedance with double hydrodynamic focusing
Scattergram: electrical and optical measurement cell by cell
Matching of the two measurements within 40µs only
5 Histograms RBC, Plt, WBC/DC, WBC/LMN, WBC/NE)
SampleSample Types:
Patient, Plt only, Hb only, pre dilution with capillary, diluent, control, calibrator
Final rates of the dilutions are identical for all modes, capillary mode included so that the same order of precision is matched whatever the mode used.
Sample volumes:
Capillary: 25 µL
Direct (open or closed tubes): about 150 µL
Manuel (open tubes only) about 180 µL
Auto Sampler (closed only): about 280 µL (depending on the viscosity of the sample)
Dimensions & weight:
Analytical module : H 54 x L56 x P56 cm - 40 Kg
Compressor : H17 x L42 x P60 cm - 18 Kg
Options:
Bar code reader (built in)
Auto Sampler with or without built in bar code reader
Bar code standards: Codabar, Code 39, Code 128, MSI, Interleaved 2 of 5