ELGA - Maxima
PURELAB Maxima Range
ELGA’s Maxima systems offer the ultimate in water purification for laboratories. They provide peak quality ultra-pure water for the most demanding applications, from HPLC to Atomic Absorption Spectrophotometry. Unique system design and advanced micro-processor monitoring technology ensure that maximum water quality is maintained at all time, with purity displayed on an easy-to-read LCD panel.
There are four different models in the Maxima range, each developed to supply optimal water quality for a specific range of applications:
Active Questions & AnswersAsk a Question
guide of this old equipment
Recent Questions & Answers
Updated byInez
Water Purification Service ProvidersView All (6)
Documents & ManualsView All Documents
Features of Maxima
- Easy-To-Use Dispenser
- Twin-Pack Technology
- Microprocessor Control System
- RS232 Printer Interface
- Economical and Easy to Use
General Specifications
There are no General Specifications available.
Additional Specifications
Performance Specifications:
Inorganics: 18.2MΩ-cm, resistivity at 25°C (sub ppb levels of trace contaminants)
TOC: <5 ppb with RO pre-treatment
Bacteria: <1 CFU/ml
Particles: 0.05µm absolute filter, 0.2µm point of use filter2
Product Specifications:
Height: 530mm
Width: 315mm
Depth: 370mm
Weight: 21kg (operational)
Feedwater Specification:
Feedwater:
i. Reverse osmosis water
ii. Deionized water (from a strong mixed bed ion exchange unit)
iii. Distilled water (single or double distilled)
iv. Electrically deionized water (as supplied by a PURELAB Option-E unit)
Inlet:
i. Tank feed – positive flooded suction – 1 psi (0.07 Bar) minimum
ii. Pressure feed – 10 psi (0.7) bar maximum (A pressure relief valve can be supplied for higher pressures)
Inlet Water Temperature: 1-35°C
Series Modals
ELGA - Maxima Analytical
[+] View Model SpecificationsDepth | 370 mm |
Flow Rate | 1.8 L/min |
Height | 530 mm |
Width | 315 mm |
Power Requirements | 85-265V 65VA |
Water Purification Method | Ion Exchange |
Weight | 21 kg (operational) |
TOC | 5 ppb with RO pre-treatment |
Additional Model Specifications | Performance Specifications: Inorganics: 18.2MΩ-cm, resistivity at 25°C (sub ppb levels of trace contaminants) Bacteria: <1 CFU/ml Particles: 0.05µm absolute filter, 0.2µm point of use filter2 Feedwater Specification: Feedwater: i. Reverse osmosis water ii. Deionized water (from a strong mixed bed ion exchange unit) iii. Distilled water (single or double distilled) iv. Electrically deionized water (as supplied by a PURELAB Option-E unit) Inlet: i. Tank feed – positive flooded suction – 1 psi (0.07 Bar) minimum ii. Pressure feed – 10 psi (0.7) bar maximum (A pressure relief valve can be supplied for higher pressures) |
ELGA - MAXIMA HPLC
[+] View Model SpecificationsDepth | 370 mm |
Flow Rate | 1.8 L/min |
Height | 530 mm |
Width | 315 mm |
Power Requirements | 85-265V 65VA |
Water Purification Method | Ion Exchange |
Weight | 21 kg (operational) |
TOC | 5 ppb with RO pre-treatment |
Additional Model Specifications | Performance Specifications: Inorganics: 18.2MΩ-cm, resistivity at 25°C (sub ppb levels of trace contaminants) Bacteria: <1 CFU/ml Particles: 0.05µm absolute filter, 0.2µm point of use filter2 Feedwater Specification: Feedwater: i. Reverse osmosis water ii. Deionized water (from a strong mixed bed ion exchange unit) iii. Distilled water (single or double distilled) iv. Electrically deionized water (as supplied by a PURELAB Option-E unit) Inlet: i. Tank feed – positive flooded suction – 1 psi (0.07 Bar) minimum ii. Pressure feed – 10 psi (0.7) bar maximum (A pressure relief valve can be supplied for higher pressures) |
ELGA - Maxima Life Science
[+] View Model SpecificationsDepth | 370 mm |
Flow Rate | 1.2 L/min |
Height | 530 mm |
Width | 315 mm |
Power Requirements | 85-265V 65VA |
Water Purification Method | Ion Exchange |
Weight | 21 kg (operational) |
TOC | 5 ppb with RO pre-treatment |
Additional Model Specifications | Performance Specifications: Inorganics: 18.2MΩ-cm, resistivity at 25°C (sub ppb levels of trace contaminants) Bacteria: <1 CFU/ml Bacterial Endotoxin: <0.02 EU/ml Particles: 5,000 molecular weight cut off ultra-filter, 0.2µm point of use filter2 Feedwater Specification: Feedwater: i. Reverse osmosis water ii. Deionized water (from a strong mixed bed ion exchange unit) iii. Distilled water (single or double distilled) iv. Electrically deionized water (as supplied by a PURELAB Option-E unit) Inlet: i. Tank feed – positive flooded suction – 1 psi (0.07 Bar) minimum ii. Pressure feed – 10 psi (0.7) bar maximum (A pressure relief valve can be supplied for higher pressures) |
ELGA - Maxima Scientific
[+] View Model SpecificationsDepth | 370 mm |
Flow Rate | 1.8 L/min |
Height | 530 mm |
Width | 315 mm |
Power Requirements | 85-265V 65VA |
Water Purification Method | Ion Exchange |
Weight | 21 kg (operational) |
TOC | 5 ppb with RO pre-treatment |
Additional Model Specifications | Performance Specifications: Inorganics: 18.2MΩ-cm, resistivity at 25°C (sub ppb levels of trace contaminants) Bacteria: <1 CFU/ml Particles: 0.02µm point of use filter Feedwater Specification: Feedwater: i. Reverse osmosis water ii. Deionized water (from a strong mixed bed ion exchange unit) iii. Distilled water (single or double distilled) iv. Electrically deionized water (as supplied by a PURELAB Option-E unit) Inlet: i. Tank feed – positive flooded suction – 1 psi (0.07 Bar) minimum ii. Pressure feed – 10 psi (0.7) bar maximum (A pressure relief valve can be supplied for higher pressures) |