HELMER - QuickThaw™ Plasma
Plasma Thawing Systems
The QuickThaw is also convenient to operate, allowing you to load, program, and walk away. The QuickThaw does the rest.
Active Questions & AnswersAsk a Question
Water Baths Service ProvidersView All (15)
Documents & ManualsView All Documents
Features of QuickThaw™ Plasma
Reduce Unused Plasma Rapid thawing with the QuickThaw reduces the amount of plasma that must be thawed in advance. The baskets agitate the units in 36.5ºC water for optimal heat transfer and the most rapid, yet safe, thawing. Reducing unused thawed plasma results in cost savings for you.
Flexible, Convenient, and Safe Each QuickThaw basket in the DH4 and DH8 operates independently, giving you the fl exibility of starting batches of plasma at different times. In addition, the baskets automatically lift plasma bags out of the water when a cycle is complete, offering the convenience of walk-away time savings. For added safety, the baskets also lift out upon high alarm activation.
Maximum Versatility Both random and apheresis plasma bags may be thawed in any unit (whether fl at or folded). With the use of the removable dividers in the DH8 model, oversized units (wider than 6 in / 153 mm) may be thawed. The QuickThaw is suitable for thawing cryoprecipitate and red blood cells as well as warming saline.
Space Saving The compact size of QuickThaw Plasma Thawing Systems conserves space on your benchtop. The small footprint of the DH2 makes it an ideal back-up unit.
Overwrap Protection The QuickThaw uses Helmer overwrap bags, the most convenient method to protect plasma during thawing. Overwraps eliminate the need for snap-seal pockets to separate the plasma from an internal water supply. Pockets crack over time, causing the need for replacement and the possibility of internal system contamination. Helmer disposable overwraps provide long term security and the QuickThaw’s open tank design allows for easy cleaning, with no hidden areas.
Thawing Capabilities Plasma can be loaded and unloaded into the QuickThaw without waiting for the water to be added and drained. Competitive snap-seal pocket systems need pumps to move water from a holding reservoir into the thawing chamber before and after each cycle, increasing thaw times and decreasing throughput.
General Specifications
There are no General Specifications available.
Series Modals
HELMER - DH2
[+] View Model SpecificationsDepth | 14.75 in |
Height | 16.25 in |
Internal Depth | 7.5 in |
Bath Volume | 8.5 L |
Internal Height | 11 in |
Width | 11.25 in |
Internal Width | 8 in |
Power Requirements | 100V / 50Hz / 3A 115V / 50/60Hz / 2.5A 230V / 50/60Hz / 1.25A |
Weight | 38 lbs |
Additional Model Specifications |
HELMER - DH4
[+] View Model SpecificationsDepth | 14.75 in |
Height | 16.25 in |
Internal Depth | 7.5 in |
Bath Volume | 18 L |
Internal Height | 11 in |
Width | 18.5 in |
Internal Width | 15.5 in |
Power Requirements | 100V / 50Hz / 8A 115V / 50/60Hz / 6A 230V / 50/60Hz / 3A |
Weight | 58 lbs |
Additional Model Specifications |
HELMER - DH8
[+] View Model SpecificationsDepth | 22 in |
Height | 16.25 in |
Internal Depth | 15 in |
Bath Volume | 32 L |
Internal Height | 11 in |
Width | 18.5 in |
Internal Width | 15.5 in |
Power Requirements | 100V / 50Hz / 11.5A 115V / 50/60Hz / 10A 230V / 50/60Hz / 5A |
Weight | 74 lbs |
Additional Model Specifications |