Tektronix - MSO/DPO2000 Series

Manufactured by  Tektronix
Follow this Equipment

Feature-rich tools for debugging mixed signal designs.

Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the MSO/DPO2000 Mixed Signal Oscilloscope Series provides advanced debug features at an entry-level price. With as many as 20 channels, you can analyze analog and digital signals with a single instrument. Combine that with automated serial and parallel bus analysis, FilterVu™ low-pass filter and innovative Wave Inspector® controls, and the MSO/DPO2000 Series provides the feature-rich tools you need to simplify and speed debug of your complex design.
Active Questions & AnswersAsk a Question

There are no current Discussions

Oscilloscopes Service ProvidersView All (2)

Request Support
Features of MSO/DPO2000 Series

Up to 4 analog and 16 digital channels:   Analyze analog and digital signals on a single instrument for system-level troubleshooting of complex designs. 

Digital phosphor display:   Quickly discover glitches and infrequent events with a 5,000 wfm/s waveform capture rate and intensity-graded display. 

Complete set of triggers:   Rapidly capture signal anomalies with over 125 available trigger combinations, including setup/hold, serial packet content and parallel data. 

Wave Inspector® controls:   Easily search, mark and navigate long record lengths to find all occurrences of your event. 

Automated Measurements:   Simplify analysis of your device with 29 automated measurements and FFT analysis. 

Parallel bus triggering and analysis (MSO Series):   Quickly debug your parallel bus with automated trigger, decode and search. 

Serial triggering and analysis (optional):   Quickly debug common serial buses with automated trigger, decode and search - I2C, SPI, CAN, LIN, and RS-232/422/485/UART. 

FilterVu™ variable low-pass filter:   Easily filter out unwanted noise without losing sight of important anomalies or glitches with the innovative peak detect glitch capture.

General Specifications
Oscilloscope TypeMixed-Signal
Depth 5.3 in
Height7.1 in
Width 14.9 in
Power Requirements 100 to 240 V ±10%, 45 to 65 Hz (90 to 264 V) 360 to 440 Hz (100 to 132 V)
Peak Power80 W max.
Weight7.9 lbs
Additional Specifications

Hardware Bandwidth Limits:  
20 MHz 
Input Coupling:  
AC, DC, GND 
Input Impedance:  
1 MΩ ±2%, 11.5 pF ±2 pF 
Input Sensitivity Range:  
2 mV/div to 5 V/div 
Vertical Resolution:  
8 bits 
Maximum Input Voltage, 1 MΩ:  
300 VRMS with peaks = ±450 V 
DC Gain Accuracy (with offset set to 0 V):  
±3% for 10 mV/div to 5 V/div 
±4% for 2 mV/div to 5 mV/div

VideosView All Videos

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com