Biosero LLC - BioFill Vial Filler and Capper
Manufactured by Biosero LLC
An automated platform for dispensing liquids into screw-cap vials in combination with automated decapping and recapping.
The BioFill is based on automatically decapping, dispensing cell suspensions and other liquids into microtubes and recapping the tubes in a 24, 48, or 96 rack SBS-1 footprint.
The BioFill can also be ordered as an integrated solution with stackers and robotics from BioSero. This will allow walkaway processing for multiple vial racks, and even potential integration into larger automated workcells.
The BioFill can also be integrated with the BioLabel tube-labeling system from Biosero, providing a complete filling/capping/bar code labeling solution.
The BioFill can also be ordered as an integrated solution with stackers and robotics from BioSero. This will allow walkaway processing for multiple vial racks, and even potential integration into larger automated workcells.
The BioFill can also be integrated with the BioLabel tube-labeling system from Biosero, providing a complete filling/capping/bar code labeling solution.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Asked bycseran
Liquid Handling Service ProvidersView All (9)
Documents & ManualsView All Documents
Features of BioFill Vial Filler and Capper
- Decapping, dispensing and recapping one column (4, 6, or 8 tubes) at a time re-using the old caps
- Decapping, dispensing and recapping one column (4, 6, or 8 tubes) at a time, but with waste of old caps and recapping with new caps from cap storage.
- Use the combination decapper/recapper and dispenser unit for decapping, dispensing and recapping - as stand alone system.
- Use the combination decapper/recapper and dispenser unit for decapping, dispensing and recapping - integrated in a robotic bench with e.g. stackers.
- Use the decapper/recapper alone as 96 tubes decapper/recapper.
- Compatible with all Tube Types: Nunc, Matrix, Micronic, MatriCal, Abgene, REMP.
- Easy operator interface simplifies training.
- Minimum distance between the decapper/recapper part and dispensing point.
The dispensing unit is provided with microprocessor-controlled precision peristaltic pump with 3-stop tubes. Dispensing volumes set via finger touch control panel or operation via PC. The tubing comes packages sterile and calibrated for quick and easy tubing changes.
Important-by dispensing only 1 open column at the time sample contact with the atmosphere and the danger for contamination is minimized.
The BioFill is easy to operate and fits within a culture cabinet or Class II hood.
General Specifications
Depth | 455 mm |
Height | 275 mm |
Width | 725 mm |
Power Requirements | 100-240VAC, 50/60Hz |
Weight | 30 kg |
Dispensing Type | Multi-channel |
Additional Specifications
Flow Rates: 5 - 2000 ul/min; +/- 2% CV at 5 ul.
Capacity : 6 – 8 unit 96-rack / minute