Esco Technologies - NordicSafe Low Noise
Manufactured by Esco Technologies
Effective Solution for Operator, Product and Environmental Protection
The Esco NordicSafe Class II Biological Safety Cabinet is a cost effective solution to providing operator, product and environmental protection within laboratories and industrial facilities. The cabinet features the use of 2 ULPA filters to deliver ISO Class 3 air cleanliness to the work zone.
Key Benefits:
Key Benefits:
- Lowest noise MSC in the industry.
- ECM Blower for low energy consumption.
- Half - speed mode
- Zero volt relay
- Quickstart™ and RS 232
- 1200mm external width
- HPA certified to EN 12469
Active Questions & AnswersAsk a Question
There are no current Discussions
Biological Safety Cabinets Service ProvidersView All (5)
Documents & ManualsView All Documents
Features of NordicSafe Low Noise
- Extremely low energy consumption (190 Watt) for environmentally-conscious operation.
- Latest generation, energy efficient ECM blower from EBM-Papst Germany maintains constant airflow, despite building voltage fluctuations.
- Quietest cabinet in industry (51 dBA) for serene working condition that helps to reduce fatigue and improves concentration.
- Half Speed Mode reduces energy consumption to 80 Watt while still maintaining personnel and product protection when the cabinet is not being used.
- Zero Volt Relay Contact, to synchronize turning ON/OFF internal blower fan with remote exhaust fan.
- Esco Sentinel™ Gold microprocessor with integrated temperature-compensated airflow monitoring system.
- Quickstart mode, to turn the blower and lights on/off, by moving the sash window to correct position.
- RS 232 data output port enables remote monitoring of cabinet operating parameters.
- Unique Esco Dynamic Chamber™ plenum design delivers quiet, uniform airflow.
- Negative pressure plenum surrounds contaminated positive pressure plenum; no fabric bags are used.
- Dual, long-life ULPA filters (per IEST-RP-CC001.3), for supply and exhaust airflow.
- Ergonomically angled front improves reach and comfort.
- Frameless, shatterproof motorized sash is easier to clean, offers larger, unobstructed viewing area.
- Multi-piece tray components which lift and remove to provide easy access encourage surface decontamination and are autoclavable.
- The front sash is motorized for convenient one touch operation.
- Raised airflow grille maintains safety by preventing blockage.
- Transparent side windows, angled front, and reduced noise levels combine to create the most comfortable, well-lit cabinet in Esco's range.
- Esco ISOCIDE™ antimicrobial surface on all painted surfaces minimizes contamination.
General Specifications
There are no General Specifications available.
Series Modals
Esco Technologies - NC2-4L8
[+] View Model SpecificationsDepth | 32 in Without Base Stand |
Height | 55.5 in Without Base Stand |
Internal Depth | 23 in |
Internal Height | 44.5 in |
Width | 47.2 in Without Base Stand |
Internal Width | 26.4 in |
Power Requirements | 220-240V, AC, 50Hz, 1 |
Peak Power | 187 W |
Lighting | 1100 Lux (102 foot candles) |
Noise Level | 51 dB |
Weight | 459 lbs |
Shipping Weight | 545 lbs |
Shipping Dimensions | 53.1 |
Cabinet Type | Class II |
Filter Type | ULPA |
Additional Model Specifications | External Dimensions(W x D x H) With Optional Base Stand, 711 mm (28") type: 1200 x 812 x 2121 mm (main body)* 47.2" x 32.0" x 83.5" Internal Work Area: 0.44 m2 (4.7 sq.ft) Tested Opening: 173 mm (6.8") Working Opening: 200 mm (7.9") Average Airflow Velocity Inflow: 0.45 m/s (90 fpm) at initial setpoint Downflow: 0.32 m/s (65 fpm) at initial setpoint with uniformity of better than +/- 20% Airflow Volume Inflow: 317 m3 /h (187 cfm) Downflow: 703 m3 /h (414 cfm) Exhaust: 317 m3 /h (187 cfm) Required Exhaust With Optional Thimble Exhaust Collar: 479 m3 /h (282 cfm) Static Pressure For Optional Thimble Exhaust Collar: 28 Pa / 0.11 in H2O Cabinet Construction Main Body: 1.2 mm (0.05") 18 gauge electrogalvanized steel with white oven-baked epoxy-polyester Isocide antimicrobial powder coated finish Work Surface: 1.5 mm (0.06") 16 gauge stainless steel, type 304, with BA finish Side Walls: UV absorbing tempered glass, 5 mm (0.2"), colorless and transparent Electrical 220-240V, AC, 50Hz, 1: Cabinet Full Load Amps (FLA): 3 A Optional Outlets FLA: 5 A Cabinet Nominal Power: 187 W Cabinet BTU: 638 |
Esco Technologies - NC2-6L8
[+] View Model SpecificationsDepth | 32 in Without Base Stand |
Height | 55.5 in Without Base Stand |
Internal Depth | 23 in |
Internal Height | 26.4 in |
Width | 70.9 in Without Base Stand |
Internal Width | 67.7 in |
Power Requirements | 220-240V, AC, 50Hz, 1 |
Peak Power | 272 W |
Lighting | 1250 Lux (116 foot candles) |
Noise Level | 59 dB |
Weight | 633 lbs |
Shipping Weight | 747 lbs |
Shipping Dimensions | 80.7"W x 33.5"D x 69.3"H |
Cabinet Type | Class II |
Filter Type | ULPA |
Additional Model Specifications | External Dimensions(W x D x H) With Optional Base Stand, 711 mm (28") type: 1800 x 812 x 2121 mm (main body)* 70.9" x 32.0" x 83.5" Internal Work Area: 0.81 m2 (8.7 sq.ft) Tested Opening: 173 mm (6.8") Working Opening: 200 mm (7.9") Average Airflow Velocity Inflow: 0.45 m/s (90 fpm) at initial setpoint Downflow: 0.32 m/s (65 fpm) at initial setpoint with uniformity of better than +/- 20% Airflow Volume Inflow: 485 m3 /h (286 cfm) Downflow: 1165 m3 /h (686 cfm) Exhaust: 485 m3 /h (286 cfm) Required Exhaust With Optional Thimble Exhaust Collar: 757 m3 /h (446 cfm) Static Pressure For Optional Thimble Exhaust Collar: 43 Pa / 0.17 in H2O Cabinet Construction Main Body: 1.2 mm (0.05") 18 gauge electrogalvanized steel with white oven-baked epoxy-polyester Isocide antimicrobial powder coated finish Work Surface: 1.5 mm (0.06") 16 gauge stainless steel, type 304, with BA finish Side Walls: UV absorbing tempered glass, 5 mm (0.2"), colorless and transparent Electrical 220-240V, AC, 50Hz, 1: Cabinet Full Load Amps (FLA): 3.5 A Optional Outlets FLA: 5 A Cabinet Nominal Power: 272 W Cabinet BTU: 928 |