Accu-Scope - 3032
Accu-Scope 3032 Inverted Microscope Series
Large viewing area with extra wide field focusable 10x eyepieces with a 22mm field of view and rubber eyeguards. Eyepieces accept 26mm reticles.
Viewing Head
A 30° viewing angle for ergonomic comfort with n interpupillary distance adjustment range of 48 – 75mm assures fatigue free viewing during extended observation sessions. An optional tilting ergonomic viewing head with a variable
inclination can provide additional user comfort.
Nosepiece
Side facing revolving quintuple nosepiece enables maximum flexibility for a wide range of magnification observations and a variety of objective combinations.
Objectives
Featuring ACCU-SCOPE’s AIS infinity optical system these objectives offer high N.A.’s and long working distances. A wide variety of plan, plan phase and plan fluor objectives are available.
Stage:
The standard configuration is supplied with a fixed plain stage. The stage can be widened on both sides to accommodate large specimens with the included paired auxiliary stage plates. A hard coating protects the stage from scratches and wear. Two metal insert plates and a glass stage insert plate is included for simple confirmation of the objective in use. An optional ergonomic mechanical stage with low position righthand controls is available. Stage movement is 120mm (X) by 78mm (Y). These optional specimen holders are available for use with the mechanical stage: Teraski holder (accepts Ø65mm petri
dish), Ø35mm petri dish holder and a slide glass holder (accepts Ø54mm petri dish).
Condenser
The ELWD condenser with N.A. 0.3 and LWD 72mm provides bright even illumination for magnifications from 4x to 40x with an aperture diaphragm. With the condenser removed the working distance is 150mm.
Phase Contrast
Designed to improve user efficiency for routine tasks the pre-centered phase contrast slider allows for quick, adjustment free observation. The Ph 1 annulus is for the 10x and 20x and the Ph 2 position is for the 40x. A third position
is left empty for Ø45mm filters.
Illuminator
A pre-centered 6 volt 30 watt variable halogen illuminator provides bright, even illumination at all magnifications. Built-in frosted and heat absorbing filters.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of 3032
- EWF10x focusable eyepieces with eyeguards, 22mm field of view
- Siedentopf trinocular viewing head with photo tube, inclined 30º, rotatable 360º
- Standard light distribution: binocular 100% or binocular/trinocular 20%/80%
- 48-75mm interpupillary distance settings
- ±5 diopter adjustment
- Pre-centered phase slider with 10x and 20x annuli and brightfield position
- Side facing quintuple nosepiece
- AIS Infinity Corrected Plan Achromat 4x, 10x and 20x objectives
- Fixed plain stage 160mm x 250mm with glass insert
- ELWD condenser, N.A. 0.3, working distance 72mm
- Coaxial fine and coarse focusing
- Variable Koehler 6 volt 30 watt halogen illumination
- blue, green and ground glass filters
- Dust cover, power cord and 5 year limited warranty
- Optional Micrometrics® CCD and CMOS digital cameras with SE Premium image analysis software
- Optional AIS Infinity Plan Achromat 40x objective, attachable mechanical stage, Ø35mm petri dish holder, teraski holder and Ø54mm glass slide holder
- Additional fluorescence filter sets sold separately
General Specifications
| Microscope Type | Inverted |
Additional Specifications
Optical System: Infinity optical system, F=180mm
Observation Method: Brightfield, Phase Contrast, Fluorescence
Eyepiece: Extra wide field focusable 10x eyepieces with 22 mm field of view and rubber eyeguards. Eyepieces accept 26mm reticles.
Nosepiece: Quintuple side facing with positive click stops
AIS Infinity Objectives: LWD Plan or Plan Fluor 4x, 10x, 20x & 40x. LWD Plan Phase 10x, 20x & 40x.
Stage: Fixed plain stage 160 x 250mm. Auxillary stages. Optional attachable mechanical stage, low position right handed coaxial controls, 120 x 78 mm movement range
Stage Plates: Glass and metal stage plate inserts.
Focusing Mechanism: Vertical revolving nosepiece (fixed stage). Coaxial coarse and fine focus mechanism with markings on fine focus knobs. Coarse stroke 37.7mm per rotation, Fine focus adjustment 0.2mm per turn.
Illumination: 6 volt 30 watt halogen; variable intensity. External lamp house for Kohler illumination
Filters: Ø 45mm Clear blue, green and ground glass
Stand: Cast alloy aluminium, Weight 19 lbs. External Dimensions: 515mm x 248mm x 473mm (LWH)