A New Approach for User-Adapted Ultrapure Water
The system features two separate and distinct components: the production unit and the delivery point-of-use unit:
- The Milli-Q production unit is a compact system that can be placed either on the bench, under the bench or on a wall–wherever it best suits you.
- The Q-POD (Quality-Point-of-Delivery) unit provides final polishing at the point-of-use, delivering ultrapure water adapted to specific needs. The Q-POD’s interface simplifies operation and displays essential data for complete user reassurance. Up to three Q-PODs can be used with each production unit at different locations within the same laboratory.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Features of Milli-Q Advantage A10
Desired water quality You just choose the appropriate media that remove the specific contaminants which may affect your results depending on the application. For example, the Millipak® filter with the Millipore Express® membrane (0.22 µm) produces particulate- and bacteria-free ultrapure water for analytical applications such as spectrophotometry, spectroscopy and chromatography. The BioPakTM ultrafilter, while removing particulates and bacteria, produces pyrogen- and nucleasefree ultrapure water for biochemical applications.
Enhanced flexibility Your work is enhanced through convenient and adaptable dispensing. Adjust the Q-POD unit arm (rotation and height) for all commonly-used laboratory glassware and plasticware. Set the optimized water quality before delivery by pressing the water recirculation button on the base of the Q-POD unit. Select the desired volume by simply using the + and – keys and then pressing the central key. The last delivered volume is recorded to facilitate re-use. Move the Q-POD dispenser from the arm for varying water delivery: low-flow, medium-flow, high-flow (up to 2 L/min).
Easy data access Following your own workflow, relevant data is accessible conveniently. See essential information on the Q-POD unit screen at any time. All critical information, including water quality, system status and warnings, is summarized on the multicolor graphic display. The water quality status also can be printed directly from the Q-POD unit. Control system use and maintenance on the water production unit screen. The main graphic screen on the production unit displays details of the system’s operation and performance. Graphics assist the user in performing specific tasks, including maintenance procedures. Protect access to critical information. An ID code and password ensure that only the designated user can access fields containing critical information, such as water quality set points.
There are no General Specifications available.
MilliporeSigma - Milli-Q Advantage A10[+] View Model Specifications
|Flow Rate||2 L/min|
|Water Purification Method||Other|
|ASTM Type||ASTM Type I|
|Power Requirements||100-230 V, 50/60 Hz|
|Additional Model Specifications||Water Quality|
Resistivity: 18.2 MΩ-cm at 25 °C
Particulates* (> 0.22 µm/mL): < 1 particulate/ml
Bacteria*: < 1 cfu/mL
Pyrogens (endotoxins)*: < 0.001 EU/mL
RNases*: < 0.01 ng/mL
DNases*: < 4 pg/µL
*Test conditions with the appropriate Q-POD final polisher.
These values are typical and may vary depending on the nature and concentration
of contaminants in the feed water.
Shipping dimensions: 22.8"H x 9"D
Operating weight: 19 kg (41.9 lb)
Q-POD delivery unit weight: 5 kg (11 lb)
Q-POD delivery unit operating weight: 5.5 kg (12.1 lb)
Distance from production unit to Q-POD: 2.9 m (9.5 ft)
Dispenser tubing length; 80 cm (31.5 in)
Electric power cable length: 2.9 m (9.5 ft)