Adixen - RSV Series
Manufactured by Adixen
Adixen Roots Pumps are suitable for a wide range of vacuum applications. In combination with primary vane pumps, or dry...
Adixen Roots Pumps are suitable for a wide range of vacuum applications. In combination with primary vane pumps, or dry pumps, they achieve low pressures with high pumping speeds.
Applications: (Combined with different backing pumps)
Applications: (Combined with different backing pumps)
- Microelectronics
- Metallurgy
- Cryogenics
- Physics research
- R&D
- Chemical industry
- Gas circulation
- Freeze-drying
- Drying
- Leak detection
- Space simulation
- Laser technology
Active Questions & AnswersAsk a Question
There are no current Discussions
Vacuum Pumps Service ProvidersView All (13)
Documents & ManualsView All Documents
Features of RSV Series
- Adixen quality and reliability Without any mechanical contact, and proven in industrial and chemical applications, the adixen Roots pumps achieve high reliability.
- Canned motor concept The motor armature and drive shaft are enclosed in a vacuum tight “can“, this design eliminates external shaft seals and potential leaks.
- Resistant to process gases and condensables The careful choice of quality components makes adixen Roots well adapted to aggressive environments. Aggressive environments require vertical flow Roots, to prevent condensate from accumulating inside the pumping chamber.
- Vacuum integrity The RSV Series is Helium leak tested to <1.10-7 mbar l/s and is ideally suited for hazardous or precious gas.
- Low noise level Compact design, quiet operation, low vibration level.
- Air cooled
General Specifications
There are no General Specifications available.
Series Modals
Adixen - RSV 1002
[+] View Model SpecificationsWeight | 235 kg |
Motor | 3.5/4kW |
Oil | 2L |
Additional Model Specifications | Nominal pumping speed: 640/770 cfm Pneurop pumping speed at 1 mbar: 370/440 cfm Max. continuous inlet pressure: 14mbar Inlet/outlet flange: 100 ISO-DN |
Adixen - RSV 2000
[+] View Model SpecificationsWeight | 365 kg |
Motor | 4.35kW |
Oil | 3.1L |
Additional Model Specifications | Nominal pumping speed: 2040/2450 Max. continuous inlet pressure: 5 mbar Max. continuous differential pressure: 40 mbar Inlet/outlet flange: 160 ISO-DN |
Adixen - RSV 301B
[+] View Model SpecificationsWeight | 88 kg |
Motor | 1.1kW |
Oil | 0.7L |
Additional Model Specifications | Nominal pumping speed: 177/212 cfm Pneurop pumping speed at 1 mbar: 153/195 cfm Max. continuous inlet pressure: 1000 mbar Inlet/outlet flange: 63 ISO-DN |
Adixen - RSV 601B
[+] View Model SpecificationsWeight | 107 kg |
Motor | 1.5kW |
Oil | 0.7L |
Additional Model Specifications | Nominal pumping speed: 354/424 cfm Pneurop pumping speed at 1 mbar: 254/300 cfm Max. continuous inlet pressure: 1000 mbar Inlet/outlet flange: 100 ISO-DN |