Aqua Solutions - Standard RO
Manufactured by Aqua Solutions
AQUA SOLUTIONS' Solution 2000 Standard RO Systems
AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems are designed for fully-automatic operation, and are compatible with most Type I and Type II Reagent Grade DI laboratory water purification Systems. AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems include a pressurized RO storage tank, which eliminates the need for level controls, overflow piping, and transfer pumps.
An AQUA SOLUTIONS RO system can effectively remove up to >95% of the contaminants in tap water, thereby reducing the operating cost of a DI system by more than 90-95%.
A single RO system can be used to pretreat the tap water feed for several Type I or Type II DI laboratory water purification systems, and/or point-of-use locations.
An AQUA SOLUTIONS RO system can effectively remove up to >95% of the contaminants in tap water, thereby reducing the operating cost of a DI system by more than 90-95%.
A single RO system can be used to pretreat the tap water feed for several Type I or Type II DI laboratory water purification systems, and/or point-of-use locations.
Active Questions & AnswersAsk a Question
There are no current Discussions
Water Purification Service ProvidersView All (6)
Documents & Manuals
There are no Documents or Manuals available.
Features of Standard RO
Solution 2000 RO Systems are also available in a High Flow/Capacity model. High flow/capacity RO systems are not available for export.
A Reverse Osmosis System should be considered under the following circumstances:
- Incoming tap water contains more than 170 parts per million (ppm) of total dissolved solids.
- DI water usage exceeds 40 liters per day on a Type II DI System.
- DI water usage exceeds 20 liters per day on a Type I DI System.
There are two criteria to consider when determining if a reverse osmosis pretreatment system is either required, or can be justified, based on cost savings:
- Can the DI system alone produce the desired quality and quantity of purified water that is needed for the applications at hand? IF NOT, AN RO PRETREATMENT SYSTEM IS REQUIRED.
- Would it cost more overall (including capital and operating costs over 1-3 years), to process the tap water via DI alone, or with a combination of RO plus DI? IF DI ALONE COSTS MORE, AN RO SYSTEM IS JUSTIFIED.
Features and Benefits:
- RO production is 10-Liters Per Hour .
- Includes 42-Liter pressurized storage tank reduces the risk of contamination and eliminates the need for a transfer pump.
- Built-in 0.1-Micron Activated Carbon Pre-filter.
- Made in the USA.
- The System has a built in TDS Meter to monitor water quality.
- One (1) year warranty.
- This item is on our GSA Contract # GS-07F-5799R.
General Specifications
There are no General Specifications available.
Series Modals
Aqua Solutions - RO2001
[+] View Model SpecificationsFlow Rate | 10 L/hr |
Power Requirements | 100-240 VAC |
Water Purification Method | RO |
ASTM Type | ASTM Type III |
Additional Model Specifications | Feed Water Quality/TDS: Less Than 1,000 PPM Storage Capacity: 42-Liter Carbon Pre-Filter: Built-In TDS Monitor: Built-In This compact Laboratory Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. It economically produces 10-Liters/hour of RO purified water by removing >95% of the contaminants in the incoming tap water. The system includes a built-in, high-capacity activated carbon pre-filter and a 42-Liter pressurized tank to store the RO purified water. |
Aqua Solutions - RO2002
[+] View Model SpecificationsFlow Rate | 20 L/hr |
Power Requirements | 100-240 VAC |
Water Purification Method | RO |
ASTM Type | ASTM Type III |
Additional Model Specifications | Feed Water Quality/TDS: Less Than 1,000 PPM Storage Capacity: 130-Liter Carbon Pre-Filter: Built-In TDS Monitor: Built-In This compact Laboratory Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. It economically produces 20-Liters/hour of RO purified water by removing >95% of the contaminants in the incoming tap water. The system includes a built-in, high-capacity activated carbon pre-filter and a 130-Liter pressurized tank to store the RO purified water. |
Aqua Solutions - RO2003
[+] View Model SpecificationsFlow Rate | 30 L/hr |
Power Requirements | 100-240 VAC |
Water Purification Method | RO |
ASTM Type | ASTM Type III |
Additional Model Specifications | Feed Water Quality/TDS: Less Than 1,000 PPM Storage Capacity: 42-Liter Carbon Pre-Filter: Built-In TDS Monitor: Built-In This compact Laboratory Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. It economically produces 30-Liters/hour of RO purified water by removing >95% of the contaminants in the incoming tap water. The system includes a built-in, high-capacity activated carbon pre-filter and a 130-Liter pressurized tank to store the RO purified water. |
Aqua Solutions - RO2004
[+] View Model SpecificationsFlow Rate | 40 L/hr |
Power Requirements | 100-240 VAC |
Water Purification Method | RO |
ASTM Type | ASTM Type III |
Additional Model Specifications | Feed Water Quality/TDS: Less Than 1,000 PPM Storage Capacity: 130-Liter Carbon Pre-Filter: Required TDS Monitor: Built-In This compact Laboratory Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. It economically produces 40-Liters/hour of RO purified water by removing >95% of the contaminants in the incoming tap water. The system includes a built-in, high-capacity activated carbon pre-filter and a 130-Liter pressurized tank to store the RO purified water. |
Aqua Solutions - RO2006
[+] View Model SpecificationsFlow Rate | 60 L/hr |
Power Requirements | 100-240 VAC |
Water Purification Method | RO |
ASTM Type | ASTM Type III |
Additional Model Specifications | Feed Water Quality/TDS: Less Than 1,000 PPM Storage Capacity: 130-Liter Carbon Pre-Filter: Required TDS Monitor: Built-In This compact Laboratory Reverse Osmosis ("RO") System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS. It economically produces 60-Liters/hour of RO purified water by removing >95% of the contaminants in the incoming tap water. The system includes a built-in, high-capacity activated carbon pre-filter and a 130-Liter pressurized tank to store the RO purified water. |