Labconco - WaterPro PS
Manufactured by Labconco
No Documents
WaterPro PS Polishing Stations
WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.
The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.
Models Include:
WaterPro PS Polishing Station with dispensing valve
WaterPro PS Polishing Station with dispensing gun and valve
WaterPro PS/HPLC Polishing Station with dispensing valve
WaterPro PS/HPLC Polishing Station with dispensing gun and valve
WaterPro PS/UF Polishing Station with dispensing valve
WaterPro PS/UF Polishing Station with dispensing gun and valve
WaterPro PS HPLC/UF Hybrid Polishing Station with dispensing gun and valve
The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.
Models Include:
WaterPro PS Polishing Station with dispensing valve
WaterPro PS Polishing Station with dispensing gun and valve
WaterPro PS/HPLC Polishing Station with dispensing valve
WaterPro PS/HPLC Polishing Station with dispensing gun and valve
WaterPro PS/UF Polishing Station with dispensing valve
WaterPro PS/UF Polishing Station with dispensing gun and valve
WaterPro PS HPLC/UF Hybrid Polishing Station with dispensing gun and valve
Active Questions & AnswersAsk a Question
3Replies
Water Quality Issue
Recent Questions & Answers
Updated byLabWrenchEditor
Water Purification Service ProvidersView All (6)
Documents & Manuals
There are no Documents or Manuals available.
Features of WaterPro PS
- Timed dispense for unattended operation
- Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
- Attractive and corrosion-resistant Type 304 stainless steel front panel
- Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water.
- Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point.
- Built-in dispensing center
- Quiet 1/4 hp motor and rotary vane recirculation pump
- Dispensing valve
- Wall mountable
- TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models).
- UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models).
- ETL listed (115 volt models)
- CE Conformity (230 volt models
General Specifications
There are no General Specifications available.
Additional Specifications
Item Dimensions: 31.1
Series Modals
Labconco - WaterPro PS Polishing Stations
[+] View Model Specifications| Flow Rate | 1.8 L/min |
| Power Requirements | Domestic: 115 volts, 60 Hz, 7.5 A |
| Water Purification Method | Other |
| ASTM Type | ASTM Type I |
| TOC | 10 ppb |
| Additional Model Specifications | Feedwater Source: tap or pretreated
[u]Purification Method[/u] Options: - Carbon Filtration, Deionization - Carbon Filtration, Deionization, Organic Adsorption, Ultraviolet Exposure - Carbon Filtration, Deionization, Organic Adsorption, Ultrafiltration, Ultraviolet Exposure [u]Application/Water Purity Desired[/u] Options: - Type I, TOC less than 10 ppb - Type I, TOC less than 5 ppb - Type I, TOC less than 10 ppb, pyrogen-free to 0.06 eµ/ml - Type I, TOC less than 5 ppb, pyrogen-free to 0.06 eµ/ml |