Caron Products and Services - 25 cu. ft. Reach-In CO2 Incubator
Controls Temperature, Relative Humidity and CO2; Infrared Sensor; No Humidity Pan; Automatic Moist Heat Decontamination Cycle.
Active Questions & AnswersAsk a Question
There are no current Discussions
CO2 Incubator Service ProvidersView All (28)
Documents & ManualsView All Documents
Features of 25 cu. ft. Reach-In CO2 Incubator
Temperature range of 10°C above ambient to 60°C is controlled with a drift-resistant RTD temperature sensor that provides stable temperature control over long periods of time. Minimal calibration is required.
Unlike conventional steam generator humidification systems, Caron's new gVapor™ humidity system delivers controlled humidity vapor on an as-needed basis without wasting energy or generating heat.
- An IR (infrared) sensor is utilized to maintain a CO2 range of 0% to 20%. This sensor measures only CO2, not temperature or humidity, and allows for fast recovery after the door is opened. Your cultures will see virtually no fluctuation in pH levels.
- The drift-resistant CO2 sensor provides excellent performance over extended periods of time. The need to constantly monitor values with an independent instrument or recalibrate is eliminated.
- This incubator comes complete with factory installed, heavy-duty casters and will roll through a standard 34" x 80" doorway without modification.
- Caron's gentle horizontal airflow system generates evenly distributed airflow across all shelf locations. Maximum uniformity and rapid recovery are maintained even under heavy cabinet loads.
- The ergonomically designed door handle provides easy access into the chamber and a handle provided on the sliding stainless steel shelves make it easy to access your valuable samples.
- The stainless steel interior is easily cleaned and highly resistant to corrosion.
- Heated, triple-pane glass minimizes condensation on the door for a clear view of your product and aids in rapid temperature recovery.
- The lockable control panel minimizes the possibility of unauthorized access. Two access ports, one on each side of the chamber, make validation easy and provide the user convenience for connecting instrumentation.
- Designed with energy efficient components, including high R, CFC-free foam insulation, the incubator is powered by commonly available laboratory electrical outlets.
General Specifications
There are no General Specifications available.
Additional Specifications
Temperature Range: 10°C Above Ambient to 60°C
Temperature Control: ± 0.1C
Temperature Uniformity: ± 0.3C
Temperature Sensor: RTD
Humidity Range: Ambient to 95% RH
Humidity Control: ± 3% RH
Humidity Sensor: Capacitive
CO2 Range: 0-20% CO2
CO2 Control: ± 0.1% CO2
CO2 Sensor: Infrared
Interior Dimensions: 32
Series Modals
Caron Products and Services - 6024-1
[+] View Model SpecificationsCO2 Incubator Type | Direct Heat |
Depth | 33.3 in |
Humidity | Ambient to 95% RH |
Temperature Uniformity | 0.3 °C |
Height | 77.1 in |
Internal Depth | 27 in |
Internal Height | 52.7 in |
Width | 35.5 in |
Internal Width | 32 in |
Power Requirements | 115 V,60 Hz, 13 A |
Chamber Volume | 25 cu. ft. |
CO2 Sensor | Infrared (IR) |
CO2 Range | 0 to 20 % |
Shipping Weight | 525 lbs |
Shelf Dimensions | 29.2 |
Temperature Accuracy | 0.1 °C |
Construction | Interior: Stainless steel. Exterior: Cold Rolled Steel, Powder Coated. Shelves: Stainless Steel |
Incubator Orientation | Floor Standing |
Additional Model Specifications | Temperature Sensor: RTD Humidity Control: ± 3% RH Humidity Sensor: Capacitive CO2 Control: ± 0.1% CO2 |
Caron Products and Services - 6024-2
[+] View Model SpecificationsCO2 Incubator Type | Direct Heat |
Depth | 33.3 in |
Humidity | Ambient to 95% |
Temperature Uniformity | 0.3 °C |
Height | 77.1 in |
Internal Depth | 27 in |
Internal Height | 52.7 in |
Width | 35.5 in |
Internal Width | 32 in |
Power Requirements | 230 V, 60 Hz, 7 A |
Chamber Volume | 25 cu. ft. |
CO2 Sensor | Infrared (IR) |
CO2 Range | 0 to 20 % |
Shipping Weight | 525 lbs |
Shelf Dimensions | 29.2 |
Temperature Accuracy | 0.1 °C |
Construction | Interior: Stainless steel. Exterior: Cold Rolled Steel, Powder Coated. Shelves: Stainless Steel |
Incubator Orientation | Floor Standing |
Additional Model Specifications | Temperature Sensor: RTD Humidity Control: ± 3% RH Humidity Sensor: Capacitive CO2 Control: ± 0.1% CO2 |
Caron Products and Services - 6024-3
[+] View Model SpecificationsCO2 Incubator Type | Direct Heat |
Depth | 33.3 in |
Humidity | Ambient to 95% |
Temperature Uniformity | 0.3 °C |
Height | 77.1 in |
Internal Depth | 27 in |
Internal Height | 52.7 in |
Width | 35.5 in |
Internal Width | 32 in |
Power Requirements | 230 V, 50 Hz, 7 A |
Chamber Volume | 25 cu. ft. |
CO2 Sensor | Infrared (IR) |
CO2 Range | 0 to 20 % |
Shipping Weight | 825 lbs |
Shelf Dimensions | 29.2 |
Temperature Accuracy | 0.1 °C |
Construction | Interior: Stainless steel. Exterior: Cold Rolled Steel, Powder Coated. Shelves: Stainless Steel |
Incubator Orientation | Floor Standing |
Additional Model Specifications | Temperature Sensor: RTD Humidity Control: ± 3% RH Humidity Sensor: Capacitive CO2 Control: ± 0.1% CO2 |