1. Home
    2.  / 
  2. Spectroscopy
    3.  / 
  3. UV/VIS Spectrophotometers
    4.  / 
  4. B&W Tek - Cypher™ H
This product is Discontinued

B&W Tek - Cypher™ H

Manufactured by  B&W Tek
Follow this Equipment

The Cypher H is a low cost and high performance linear PDA spectrometer with high speed plug and play USB 2.0 or 1.1...

The Cypher H is a low cost and high performance linear PDA spectrometer with high speed plug and play USB 2.0 or 1.1 interface and is equipped with a 512 element default linear PDA array, optimized high throughput spectrograph, 16 bit built-in digitizer, Windows based operating software, and fiber coupled input capability.     The PDA offers high dynamic range, high signal to noise ratio and enhanced UV as well as NIR sensitivity, therefore is ideal for display device testing and other measurement applications. Suitable applications also include detecting small light differences at high light levels.     Cypher H spectrometers come in standard wavelength ranges of UV, Vis, NIR or custom specified. Pixel resolution of 0.3 nm or higher can be supplied. Flexible custom configurations available.     Model: BRC711E
Active Questions & AnswersAsk a Question

There are no current Discussions

UV/VIS Spectrophotometers Service ProvidersView All (32)

Request Support
Features of Cypher™ H
Highlights    
        
  • Enhanced QE in NIR    
  • High UV response    
  • High dynamic range    
  • Plus-and-play USB 2.0/1.1 interface    
  • 16 bit digitizer    
  • No moving parts    
  • 512 elements PDA array (other options available)    
  • Portable and light weight    
     Applications    
        
  • UV and NIR applications    
  • LED, LCD and other display devices test    
  • Color measurement    
  • Small light difference detection    
General Specifications
Depth 4.01 in
Height3.3 in
Width 6.22 in
Power Requirements 100-240 VAC, 50/60 Hz, 0.5 A @ 120 VAC
Weight2.6 lbs
Photodetector Diode Array
Stray Light0.05% at 600 nm for Vis
Additional Specifications

Power input: 5 V DC @ 10 nm FWHM dependent on grating and slit selections    
Number of array elements: 512 @ 25 µm x 2500 µm per element    
Effective range: As reported on Configuration report    
System warm-up time: 10 nm FWHM dependent on grating and slit selections    
Digitizer resolution: 16 bit (65,535:1)    
Digitizer speed: 500 kHz (maximum)    
Integration time: 2 (min) - 65535 (max) milliseconds    
Computer interface: High speed USB 2.0 and 1.1 compatible    
External trigger: Ext. Trigger/Aux port available    
Ext. trigger pulse width: > 0.05 ms    
Ext. trigger level: -2.8 to -5.5 V DC negative edge effective    
Trigger response delay: < 0.05 ms    
Operating software: BWSpec for Windows Me, 2000 and XP

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com