1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Lab Pumps
    4.  / 
  4. Tecan - Cavro XLP 6000 pump

Tecan - Cavro XLP 6000 pump

Manufactured by  Tecan
Follow this Equipment

The most versatile 60mm stroke OEM syringe pump

The Cavro XLP 6000 Pump is a 60 mm stroke syringe pump that is fully programmable and can be used as a stand alone module or, when controlled by an external computer or microprocessor, can automate pipetting, diluting and dispensing operations in the 5 Μl to 25 ml range. 
 
The pump has been designed for ease of integration and low maintenance. The new hardware and firmware automatically detects the communication interface (RS 232, RS 485, or CAN) and communication protocol (OEM, Data Terminal). The Cavro XLP 6000 Pump also allows the user to reconfigure the pump to run different valve types and at different baud rates. The two digital inputs and three outputs for TTL level signals can be used for synchronization with external devices. Multi-pump communication is possible through RS 485 or CAN interface, addressing up to 15 modules through a single communication bus. 
 
The Cavro XLP 6000 Pump family of products is UL recognized (standard UL61010A-1) and bears the UL designation label.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked bytri

control of instrument
avatar placemark

Asked byTom14724

How do you address pump 11 in a command string, using DT Protocol?
View All Questions & Answers (2)

Lab Pumps Service ProvidersView All (3)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Cavro XLP 6000 pump
  • More flexibility with wide range of syringe volumes and valve options 
  • Robust and reliable workhorse 
  • Easy to integrate
General Specifications
Depth 4.76 in
Height10 in
Width 2.56 in
Weight4.7 lbs
Additional Specifications

Plunger Drive 
Principle:  
Stepper motor driven lead screw with optical encoder for step loss detection 
Travel:  
60 mm 
Syringes:  
50 µL, 100 µL, 250 µL, 500 µL, 1.0 mL, 2.5 mL, 5.0 mL, 10 mL, 25 mL 
 
Valve/Valve Drive 
Wetted Materials:  
Plastic - Plug: FEP 
Body: PCTFE 
Options:  
120° 3-port, 90° 4-port, T-valve, Y block, 90° 3-port distribution 
Turn Time:  
< 250 ms between adjacent ports 
Fittings:  
1/4-28” or M6 tubing fitting, 1/4-28” syringe fitting 
Firmware:  
Programmable ramps, cutoff speed, backlash compensation, plunger speeds, delays and loops, change speed on the fly, terminate moves, delays, diagnostics, absolute and relative positions 
 
Power Requirements 
Supply Voltage:  
24 VDC ± 10% 
Current:  
Peak: 1 A 
Resolution:  
Standard:  
6,000 (standard) / 48,000 (microstepping) increments 
Speed:  
1.2 seconds - 160 minutes per stroke 
Precision:  
= 0.05% C.V. within run at full stroke (at 23°C, with 500 µL syringe and above using deionized water) 
Accuracy:  
= 0.5 % deviation from theoretical result at full stroke (at 23° C, with 500 µL syringe and above using deionized water) 
 
Interface 
Type:  
RS-232, RS-485, or CAN BUS 
Baud Rate:  
RS232/485: 9,600 or 38,000 
CAN: 100Kb, 125Kb, 250Kb, 500Kb, and 1Mb 
Format:  
Data Bits: 8 
Parity: None 
Stop Bit: 1 
Half Duplex 
Addressing:  
Maximum of 15 pumps can be addressed individually 
Communications:  
Data Terminal and OEM protocol (serial); “Cavro CAN” (CAN) 
 
Environmental (Operating Mechanism) 
Operating Temperature:  
15° - 40°C (59° - 104°F) 
Humidity (Non-Condensing):  
20-80% RH at 40°C (104°F) 
Safety and Regulatory:  
The XLP is a UL recognized component. Tecan Systems UL customer file is E164638. 
Compliance:  
Tecan Systems' Quality System is ISO 13485 Certified.

Looking for

Tecan - Cavro XLP 6000 pump?

Shop on LabX.com