Tecan - Cavro XCalibur Pump

Manufactured by  Tecan
Follow this Equipment

Compact high performance 30mm stroke OEM syringe pump

The Cavro XCalibur Pump is a compact, high performance syringe pump designed for precision liquid handling operations in the 5 µl to 5 ml range. It is fully programmable and can operate as a standalone module or, when controlled by an external computer or microprocessor, can automate pipetting, diluting and dispensing operations. 
 
The pump’s hardware and firmware automatically detect the communication interface (RS 232, RS 485, or CAN) and communication protocol (OEM, Data Terminal). The user can also reconfigure the pump to run different valve types and at different baud rates. The Cavro XCalibur Pump provides two digital inputs and three outputs for TTL level signals that can be used for synchronization with external devices. Multi-pump communication is possible through RS 485 or CAN interface, addressing up to 15 modules through a single communication bus. 
 
The Cavro XCalibur Pump family of products is UL recognized (standard UL61010A-1) and bears the UL designation label.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

Lab Pumps Service ProvidersView All (3)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Cavro XCalibur Pump
  • Compact dimensions allow optimum use of space 
  • Robustness and reliability results in long life and less maintenance 
  • Easy to integrate
General Specifications
Depth 4.5 in
Height5 in
Width 1.8 in
Additional Specifications

Plunger Drive 
Principle:  
Ball screw drive with linear encoder step loss detection 
Travel:  
30 mm 
Syringes:  
50 µL, 100 µL, 250 µL, 500 µL, 1.0 mL, 2.5 mL, 5.0 mL 
 
Valve/Valve Drive 
Valve Options:  
120° 3-port, 90° 4-port, T-valve, Y block 90° 3-port distribution 
Turn Time:  
<250 ms between adjacent ports 
Drive:  
Stepper motor with optical encoder for positioning feedback 
Materials:  
Plug: FEP 
Body: PCTFE 
Standard Fittings:  
1/4-28'' or M6 for tubing ports, 1/4-28'' screw fitting for syringe port 
Firmware:  
Programmable ramps, cutoff velocity, backlash compensation, plunger speeds, delays and loops, change speeds on the fly, terminate moves, diagnostics, absolute and relative positions. 
 
Power Requirements 
Supply Voltage:  
24 VDC ± 10% 
Current:  
Peak: 1.5 Amps 
Resolution:  
3,000 increments in standard mode and 24,000 increments in microstep mode 
Speed:  
1.2 seconds - 20 minutes / full stroke depending upon syringe size and tubing 
Precision:  
<0.05% C.V. within run at full stroke (at 23°C, with 1 mL syringe using deionized water) <0.5% C.V. within run at 10% stroke (at 23°C, with 1 mL syringe using deionized water) 
Accuracy:  
<1.0% deviation from expected value at full stroke (at 23°C, with 1 mL syringe using deionized water) 
 
Interface 
Type:  
RS-232, RS-485, or CAN BUS 
Baud Rate:  
RS232/485: 9,600 or 38,000 
CAN: 100Kb, 125Kb, 250Kb, 500Kb, and 1Mb 
Format:  
Data Bits: 8 
Parity: None 
Stop Bit: 1 Half Duplex 
Addressing:  
Up to 15 pumps can be addressed individually 
Communications:  
Data Terminal and OEM protocol (serial); “Cavro CAN” (CAN) 
 
Environmental 
Operating Temperature:  
15° - 40°C (59° - 104°F) 
Humidity (Non-Condensing):  
20-80% RH at 40°C (104°F) 
Safety and Regulatory:  
The XCalibur is a UL recognized component. Tecan Systems UL customer file is E164638. 
Compliance:  
Tecan Systems' Quality System is ISO 13485 Certified.

Looking for

Tecan - Cavro XCalibur Pump?

Shop on LabX.com