SPEX SamplePrep - 8000D Dual Mixer/Mill®
Manufactured by SPEX SamplePrep
No Documents
High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding...
High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry,brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. CE Approved.
Typical samples include: Rocks, Minerals, Sand, Cement, Slag, Ceramics, Catalyst Supports, Glass, Pharmaceuticals, Plant and Animal Tissues, Seeds, Paints, Inks
Typical samples include: Rocks, Minerals, Sand, Cement, Slag, Ceramics, Catalyst Supports, Glass, Pharmaceuticals, Plant and Animal Tissues, Seeds, Paints, Inks
Active Questions & AnswersAsk a Question
There are no current Discussions
Mills and Grinders Service ProvidersView All (1)
Documents & Manuals
There are no Documents or Manuals available.
Features of 8000D Dual Mixer/Mill®
- Accepts all SPEX SamplePrep Mixer/Mill(R) Grinding and Mixing Vial Sets.
- Also called a shaker mill or high-energy ball mill.
- Dual clamps enable multiple sample processing for high-throughput applications.
- Efficient two-clamp laboratory mill commonly referred to as the "SPEX Mill".
- Equipped with forced-air cooling and safety interlock system for operator protection.
- Extended Running Time Chip is available for extending timer range to 1,000 or 10,000 minutes.
- For efficiency, clamps are run in balance with the same vial and load in each clamp.
- For grinding multiple samples in the 0.2 - 10 gram range or mixing up to 60 mL of multiple sample per clamp.
- Reduces samples to analytical fineness and can be utilized for mechanical alloying and nanomilling.
- Shock mounted motor enables bench top operation.
- Steel housing protects the clamp mechanism and rugged construction ensures a long life of heavy work.
- The 8010 and 8011 Multiple-Sample Adapters permit processing of multiple smaller samples.
- Variable-range electronic timer is factory-set for 100-minute range.
- Wide selection of grinding and mixing vials available including hardened steel, stainless steel, tungsten carbide, alumina ceramic, zirconia ceramic, silicon nitride, agate, polystyrene, methacrylate, polystyrene, and polycarbonate.
General Specifications
| Power Requirements | 115V/60Hz or 230V/50Hz |
| Weight | 92 lbs Gross Weight |
Additional Specifications
Dimensions:
24 in (61cm) x 17 in (43cm) x 11 in (28cm)
Net Weight:
68 lbs (31kg)
Motor:
1/3 hp, 1725 RPM @ 60Hz, 1425 RPM @ 50Hz
Power Cord:
3-prong grounded plug, 115V 60Hz or 2-prong European plug, 230V50Hz
Clamp Movement:
2 1/3 in (5.9cm) back-and-forth, 1 in (2.5cm) side-to-side
Clamp Speed:
1060 cycles/minute (115V) or 875 cycles/minute (230V)
Timer/Controls:
Start and stop buttons, programmable 100-minute timer withdigital display