New Brunswick Scientific - Excella Benchtop Incubator Shakers
Manufactured by New Brunswick Scientific
Incubated Excella E24 and E24R with Added Refrigeration and Console E25 and E25R
Excella temperature-controlled lab shakers are available with choice of incubation only or incubation with added refrigeration. Benchtop E24 incubator shaker and E24R with added refrigeration accommodate test tubes or flasks up to 2.8 liters in a tightly-sealed growth chamber, featuring a clear acrylic lid for excellent visibility of all samples. Designed for larger-capacity needs, console-styled E25 and E25R models accept flasks up to 6 liters and accommodate as many as (12) 2 Liter flasks.
Active Questions & AnswersAsk a Question
1Replies
Disinfecting
Recent Questions & Answers
Updated byGlenn PICKETT
Shakers Service ProvidersView All (14)
Documents & ManualsView All Documents
Features of Excella Benchtop Incubator Shakers
- Uniform Temperature Control provided by self-correcting microprocessor feedback control and tightly constructed chamber. High-velocity fans ensure rapid thermal recovery
- Temperature & Speed Can Be Calibrated via keypad
- Crystal Clear Lid Provides Excellent Visibility minimizing the need to open the chamber; lifts out of the way for easy accessibility to samples
- RS-232 Provided for Data Logging
- Safety Features include automatic cut out of shaker when lid is opened to protect operator; and fail-safe thermostat that turns off heat if high-temperature limit is exceeded to protect cultures
General Specifications
There are no General Specifications available.
Series Modals
New Brunswick Scientific - E24
[+] View Model Specifications| Depth | 30 in |
| Height | 24 in |
| Plate Depth | 18 in |
| Maximum Shaking Speed | 400 rpm |
| Plate Width | 18 in |
| Timer | Enables programmable shaking periods from 0.1 hr to 99.9 hrs. Shuts off agitation at end of period |
| Width | 22 in |
| Maximum Temperature | 60 °C |
| Power Requirements | 100 V 50/60 Hz, 120 V 50/60 Hz, 230 V 50 Hz, 800 VA |
| Orbital Diameter | 0.75 in |
| Weight | 135 lbs |
| Controls | Digital |
| Motor | UniCentric™ heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings |
| Shaking Speed | 50 to 400 rpm |
| Shipping Weight | 145 lbs |
| Shaker Type | Orbital shaker |
| Additional Model Specifications | Accuracy and control: ±0.1°C at 37°C, regulated by Pl microprocessor feedback control with platinum RTD sensor
Heaters: Low-watt density resistance-type heaters Control: ± 2 rpm over entire speed range by means of PI microprocessor controller. Acceleration circuit prevents sudden starts and minimizes splashing Alarms: Visible warning signal indicates when speed deviates more than 5 rpm, and temperature more than 1°C from setpoints, and when timer has expired LED Dispaly: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Safety: Sensor stops shaker when lid is opened and shuts off temperature when high temperature limit is exceeded Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored. (Indicated by flashing display). |
New Brunswick Scientific - E24R
[+] View Model Specifications| Depth | 30 in |
| Height | 24 in |
| Plate Depth | 18 in |
| Maximum Shaking Speed | 400 rpm |
| Plate Width | 18 in |
| Timer | Enables programmable shaking periods from 0.1 hr to 99.9 hrs. Shuts off agitation at end of period |
| Width | 22 in |
| Maximum Temperature | 60 °C |
| Power Requirements | 100 V 50/60 Hz, 120 V 50/60 Hz, 230 V 50 Hz, 1,500 VA |
| Orbital Diameter | 0.75 in |
| Weight | 180 lbs |
| Controls | Digital |
| Motor | UniCentric™ heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings |
| Shaking Speed | 50 to 400 rpm |
| Shipping Weight | 190 lbs |
| Shaker Type | Orbital shaker |
| Additional Model Specifications | Accuracy and control: ±0.1°C at 37°C, regulated by Pl microprocessor feedback control with platinum RTD sensor
Refrigeration: Hermetically-sealed compressor uses CFC-free refrigerant Heaters: Low-watt density resistance-type heaters Control: ± 2 rpm over entire speed range by means of PI microprocessor controller. Acceleration circuit prevents sudden starts and minimizes splashing Alarms: Visible warning signal indicates when speed deviates more than 5 rpm, and temperature more than 1°C from setpoints, and when timer has expired LED Dispaly: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Safety: Sensor stops shaker when lid is opened and shuts off temperature when high temperature limit is exceeded Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored. (Indicated by flashing display). |
New Brunswick Scientific - E25
[+] View Model Specifications| Depth | 30.5 in |
| Height | 41.7 in |
| Plate Depth | 18 in |
| Maximum Shaking Speed | 400 rpm |
| Plate Width | 30 in |
| Timer | Enables programmable shaking periods from 0.1 hr to 99.9 hrs. Shuts off agitation at end of period |
| Width | 50 in |
| Maximum Temperature | 60 °C |
| Power Requirements | 100 V 50/60 Hz, 120 V 50/60 Hz, 230 V 50 Hz, 800 VA |
| Orbital Diameter | 1 in |
| Weight | 420 lbs |
| Controls | Digital |
| Motor | UniCentric™ heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings |
| Shaking Speed | 50 to 400 rpm |
| Shipping Weight | 450 lbs |
| Shaker Type | Orbital shaker |
| Additional Model Specifications | Accuracy and control: ±0.1°C at 37°C, regulated by Pl microprocessor feedback control with platinum RTD sensor
Heaters: Low-watt density resistance-type heaters Control: ± 2 rpm over entire speed range by means of PI microprocessor controller. Acceleration circuit prevents sudden starts and minimizes splashing Alarms: Visible warning signal indicates when speed deviates more than 5 rpm, and temperature more than 1°C from setpoints, and when timer has expired LED Dispaly: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Safety: Sensor stops shaker when lid is opened and shuts off temperature when high temperature limit is exceeded Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored. (Indicated by flashing display). |
New Brunswick Scientific - E25R
[+] View Model Specifications| Depth | 30.5 in |
| Height | 41.7 in |
| Plate Depth | 18 in |
| Maximum Shaking Speed | 400 rpm |
| Plate Width | 30 in |
| Timer | Enables programmable shaking periods from 0.1 hr to 99.9 hrs. Shuts off agitation at end of period |
| Width | 50 in |
| Maximum Temperature | 60 °C |
| Power Requirements | 100 V 50/60 Hz, 120 V 50/60 Hz, 230 V 50 Hz, 1,500 VA |
| Weight | 450 lbs |
| Controls | Digital |
| Motor | UniCentric™ heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings |
| Shaking Speed | 50 to 400 rpm |
| Shipping Weight | 480 lbs |
| Shaker Type | Orbital shaker |
| Additional Model Specifications | Accuracy and control: ±0.1°C at 37°C, regulated by Pl microprocessor feedback control with platinum RTD sensor
Refrigeration: Hermetically-sealed compressor uses CFC-free refrigerant Heaters: Low-watt density resistance-type heaters Control: ± 2 rpm over entire speed range by means of PI microprocessor controller. Acceleration circuit prevents sudden starts and minimizes splashing Alarms: Visible warning signal indicates when speed deviates more than 5 rpm, and temperature more than 1°C from setpoints, and when timer has expired LED Dispaly: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Safety: Sensor stops shaker when lid is opened and shuts off temperature when high temperature limit is exceeded Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored. (Indicated by flashing display). |