New Brunswick Scientific - Innova 43 Series
Manufactured by New Brunswick Scientific
Innova 43 Large-Capacity Incubator Shakers
Innova 43 Incubator Shakers and Innova 43R with added refrigeration are the perfect choice for handling large quantities of cultures with precision and ease. These large-capacity laboratory shakers accept glassware up to 6 liters, and come with a programmable controller to automate parameter changes on the basis of time. Choice of 1" or 2" orbits, and options for humidity probe, gassing and UV germicidal light are just a few of the many available options.
Active Questions & AnswersAsk a Question
5Replies
Shaker not working
Recent Questions & Answers
Updated byAnonymous
Shakers Service ProvidersView All (14)
Documents & ManualsView All Documents
Features of Innova 43 Series
User-Friendly
- Ready When You Are. Automatically ramp temperature up, so your study can get started when you arrive in the lab. Speed up, slow down or stop agitation on a timed basis. Or let your shaker place your cultures in metabolic stasis until you're ready to attend to them. It's all possible with our easy-to-use programmable controller. Optional photosynthetic lighting and UV decontamination are also programmable on Model 43R
- Controls for Entering & Viewing Setpoints are Exceptionally Easy-to-Use. Display is clearly visible from all angles, across the room, and in the dark
- Output Signal to RS232 Enables Data Logging and Computer Control
- Timed Studies Can Be Programmed for Automatic Agitation Shut-Off. End-of-study alarm & status light can be deactivated for continuous operation
- Audible and Visible Alarms alert the user to setpoint deviations. Audible alarm can be muted
- Multi-Function Reservoir humidifies chamber to reduce sample evaporation and protect unit from spills. Built-in drain facilitates clean up
- Electronics & Mechanical Components Are Enclosed, Protected From Accidental Spills
- Automatic Restart After Power Interrupt with Non-Volatile Memory keeps studies running smoothly
- NBS Shakers Are the Quietest-Running In the Industry providing a more favorable work environment
- A Wide Variety of Interchangeable Accessory Platforms are available to accommodate gel trays, culture tubes and flasks. Platforms from previous NBS model shakers can be used
- Easy Opening Lids. Foot pedal assist provides hands-free operation
- Casters Facilitate Mobility
Culture-Friendly
- Microprocessor Controls With Self-Correcting PI Feedback precisely regulate speed, running time, and incubation, as well as optional refrigeration
- Uniform and Precise Temperature Control: ±0.1°C with uniformity of ±0.25°C at 37°C
- Expanded Temperature Range Eliminates Need to Order a More Expensive High-Temperature Model.
- Speed Range Provides Versatility for Culturing a Wide Range of Cell Types
- Unique Acceleration - Deceleration Circuit prevents sudden starts and stops. Minimizes mechanical damage for longer shaker life. Eliminates flask closure wetting which would otherwise interfere with oxygen transfer
Safe & Durable
- NBS' Often Imitated, But Never Duplicated Triple-Eccentric Drive is precisely counterbalanced to impart smooth, uniform motion to all flasks regardless of their position on the platform. Ensures dependable day-in and day-out performance
- Open-Lid Cutout Switch stops agitation when chamber is open
- Thermostat Fail-Safe shuts off heaters if high limit is exceeded
- Cool-Running Brushless Motor never requires lubrication; and provides years of long life
- cETLus Certified. Meets CSA, UL and CE standards
- Comprehensive Warranty - Covers three-years on parts and two years on labor
General Specifications
There are no General Specifications available.
Series Modals
New Brunswick Scientific - 43
[+] View Model SpecificationsDepth | 32 in |
Height | 40.6 in |
Internal Depth | 22.25 in |
Plate Depth | 18 in |
Internal Height | 19.25 in |
Maximum Shaking Speed | 500 rpm |
Plate Width | 30 in |
Width | 45.5 in |
Internal Width | 34.75 in |
Maximum Temperature | 80 °C |
Power Requirements | 120V 60Hz; 230V 50Hz; 100V 60Hz; 100V 50Hz, 800 VA |
Orbital Diameter | 1 in |
Weight | 420 lbs |
Controls | Digital |
Motor | Triple-eccentric counter-balanced drive in cast iron housing with 9 permanently lubricated ball bearings. Driven by solid-state brushless DC motor |
Shaking Speed | 25 to 500 rpm with 1 |
Shaker Type | Incubating Shaker |
Additional Model Specifications | Temperature Accuracy & Control: ± 0.1°C with a nominal uniformity of ± 0.25°C at 37°C Refrigeration: Innova 43R only. Hermetically-sealed compressor uses CFC-free refrigerant Heaters: Low watt-density, resistance heaters with high-temperature safety thermostat cut-out Timer and Parameter Control: 4 modes: - Speed and temperature continuous - Shaker can be set to run from 0.1 to 99.9 hours - On-board firmware can program multiple parameter changes to temperature and speed. On 43R can program optional photosynthetic lighting and UV decontamination - Shaker control and data logging via RS-232 and remote computer running conventional laboratory management software or HyperTerminal Alarms, Audible and Visible: Indicate when speed deviates more than 5 rpm or temperature more than 1°C from setpoint, and when program or time has finished. Alarm may be muted Safety: Mechanical and electronic. Acceleration circuit prevents sudden starts and stops. Sensor shuts off temperature when high-temperature limit is exceeded. Setpoint retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display). |
New Brunswick Scientific - 43R
[+] View Model SpecificationsDepth | 32 in |
Height | 40.6 in |
Internal Depth | 22.25 in |
Plate Depth | 18 in |
Internal Height | 19.25 in |
Maximum Shaking Speed | 500 rpm |
Plate Width | 30 in |
Width | 45.5 in |
Internal Width | 34.75 in |
Maximum Temperature | 80 °C |
Power Requirements | 120V 60Hz; 230V 50Hz; 100V 60Hz; 100V 50Hz, 1,500 VA |
Orbital Diameter | 1 in |
Weight | 450 lbs |
Controls | Digital |
Motor | Triple-eccentric counter-balanced drive in cast iron housing with 9 permanently lubricated ball bearings. Driven by solid-state brushless DC motor |
Shaking Speed | 25 to 500 rpm with 1 |
Shaker Type | Incubating Shaker |
Additional Model Specifications | Temperature Accuracy & Control: ± 0.1°C with a nominal uniformity of ± 0.25°C at 37°C Refrigeration: Innova 43R only. Hermetically-sealed compressor uses CFC-free refrigerant Heaters: Low watt-density, resistance heaters with high-temperature safety thermostat cut-out Timer and Parameter Control: 4 modes: - Speed and temperature continuous - Shaker can be set to run from 0.1 to 99.9 hours - On-board firmware can program multiple parameter changes to temperature and speed. On 43R can program optional photosynthetic lighting and UV decontamination - Shaker control and data logging via RS-232 and remote computer running conventional laboratory management software or HyperTerminal Alarms, Audible and Visible: Indicate when speed deviates more than 5 rpm or temperature more than 1°C from setpoint, and when program or time has finished. Alarm may be muted Safety: Mechanical and electronic. Acceleration circuit prevents sudden starts and stops. Sensor shuts off temperature when high-temperature limit is exceeded. Setpoint retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display). |