New Brunswick Scientific - Innova 44 Series
Manufactured by New Brunswick Scientific
Space-Saving, Stackable Incubator Shakers
New Brunswick Scientific's Innova 44 Series Shakers can be stacked up to three units high (as shown), tripling the capacity of space usually occupied by a single incubator shaker. Based on the extremely popular Innova 4400 series, the Innova 44 includes many new standard features and the latest technology available. Innova Model 44 offers incubation, while Innova Model 44R adds refrigeration.
Active Questions & AnswersAsk a Question
1Replies
Can't open front door (latch broken)
Shakers Service ProvidersView All (14)
Documents & ManualsView All Documents
Features of Innova 44 Series
Convenience
- Space-Saving Door glides up and out of your way
- Slide-Out Platform provides easy access to all samples
- Intuitive Programming allows multiple parameter changes-temperature, speed, photosynthetic lights* and UV light decontamination*. All are easily changed on a timed basis. Ideal for heat inductions or temperature reductions to slow growth, eliminating unnecessary trips back to the lab
- Double-Pane, Thermal Glass provides excellent insulation and clear observation of cultures
- Interior Chamber Light enhances observation
- Multi-Function Reservoir humidifies chamber to reduce sample evaporation and protect unit from spills. Built-in drain facilitates clean up
- Pull-Out Service Module allows convenient access to all electronic and heating/cooling components
Dependability
- NBS Renowned Triple-Eccentric Gyrotory® Drive provides smooth, uniform motion to cultures, while ensuring long shaker life and quiet operation. Others may claim to utilize a similar design, but only NBS' drive is built on a cast-iron base, with shafts machined to tolerances within 0.0002" (0.00051 cm)
- Extremely Rugged Construction built with high-quality materials for years of continuous, worry-free operation
- Audible and Visible Alarms alert user to speed and temperature deviations
- Backed by an Industry-Leading Warranty and factory-trained field service support
Performance
- Superior Air Circulation System with low-watt-density resistance heaters for rapid temperature equilibration and excellent uniformity
- Precisely-Regulated Temperature, ranging from +5ºC above ambient to 80ºC (-20ºC below ambient to 80ºC for Innova 44R); accurate within ±0.1ºC
- Dynamic Speed Range from 25 to 400 rpm controlled within ±1 rpm
- Timed Shaking from 0.1 to 99.9 hours, or continuous shaking
- RS-232 Computer Interface allows remote data logging and program control using standard lab management software
- Heavy-Duty Door Gasket maintains a leak-free seal and ensures excellent temperature uniformity
- Extra-Large Chamber holds flasks up to 5 liters
General Specifications
There are no General Specifications available.
Series Modals
New Brunswick Scientific - 44
[+] View Model SpecificationsDepth | 33 in |
Height | 26 in |
Internal Depth | 26 in |
Plate Depth | 18 in |
Internal Height | 18 in |
Maximum Shaking Speed | 400 |
Plate Width | 30 in |
Width | 53 in |
Internal Width | 36 in |
Maximum Temperature | 80 °C |
Power Requirements | 120V 60Hz; 230V 50Hz; 100V 60Hz; 100V 50Hz, 800 VA |
Weight | 525 lbs |
Controls | Digital |
Motor | Triple-eccentric counterbalanced drive in cast iron housing with 9 permanently lubricated ball bearings. Driven by solid-state brushless DC motor |
Shaking Speed | 25 to 400 rpm with 1 |
Shaker Type | Incubating Shaker |
Additional Model Specifications | Temperature Accuracy and Control: ± 0.1°C at 37°C with a nominal uniformity of ± 0.25°C Refrigeration: Innova 44R only. Hermetically-sealed compressor uses CFC-free refrigerant Heaters: Low watt-density, resistance heaters with high-temperature safety thermostat cut-out Timer and Parameter Control: 4 modes: - Speed and temperature continuous - Shaker can be set to run from 0.1 to 99.9 hours - On-board firmware can program multiple parameter changes to temperature and speed. On 44R can program optional photosynthetic lighting and UV decontamination - Shaker control and data logging via RS-232 and remote computer running conventional laboratory management software or HyperTerminal Alarms, Audible and Visible:Indicate when speed deviates more than 5 rpm or temperature more than 1°C from setpoint, and when program or time has finished. Alarm may be muted. Safety, Mechanical and Electronic: Sensors limit speed of shaker when unbalanced, stops shaker when excess vibration is detected and shuts off temperature when high-temperature limit is exceeded Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display). |
New Brunswick Scientific - 44R
[+] View Model SpecificationsDepth | 33 in |
Height | 26 in |
Internal Depth | 26 in |
Plate Depth | 18 in |
Internal Height | 18 in |
Maximum Shaking Speed | 400 rpm |
Plate Width | 30 in |
Width | 53 in |
Internal Width | 36 in |
Maximum Temperature | 80 °C |
Power Requirements | 120V 60Hz; 230V 50Hz; 100V 60Hz; 100V 50Hz, 1,400 VA |
Weight | 570 lbs |
Controls | Digital |
Motor | Triple-eccentric counterbalanced drive in cast iron housing with 9 permanently lubricated ball bearings. Driven by solid-state brushless DC motor |
Shaking Speed | 25 to 400 rpm with 1 |
Shaker Type | Incubating Shaker |
Additional Model Specifications | Temperature Accuracy and Control: ± 0.1°C at 37°C with a nominal uniformity of ± 0.25°C Refrigeration: Innova 44R only. Hermetically-sealed compressor uses CFC-free refrigerant Heaters: Low watt-density, resistance heaters with high-temperature safety thermostat cut-out Timer and Parameter Control: 4 modes: - Speed and temperature continuous - Shaker can be set to run from 0.1 to 99.9 hours - On-board firmware can program multiple parameter changes to temperature and speed. On 44R can program optional photosynthetic lighting and UV decontamination - Shaker control and data logging via RS-232 and remote computer running conventional laboratory management software or HyperTerminal Alarms, Audible and Visible:Indicate when speed deviates more than 5 rpm or temperature more than 1°C from setpoint, and when program or time has finished. Alarm may be muted. Safety, Mechanical and Electronic: Sensors limit speed of shaker when unbalanced, stops shaker when excess vibration is detected and shuts off temperature when high-temperature limit is exceeded Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display). |