New Brunswick Scientific - Excella Open Air

Manufactured by New Brunswick Scientific

Models E1, E2, E5 and E10 Economical Large-Capacity Open Air Shakers

When built-in temperature control is not needed, NBS Excella Open-Air Shakers are the solution. Ruggedly-built for use on the bench, in an incubator, or in a warm- or cold-room, these shakers are available in three sizes. All but the E1 are microprocessor-controlled with digital display.

Active Questions & AnswersAsk a Question

There are no current Discussions

Shakers Service ProvidersView All (14)

Request Support

Manuals & DocumentsFeaturesSpecifications

Documents & ManualsView All Documents

Features of Excella Open Air

Speed Can Be Calibrated via keypad
Accessory Platforms are interchangeable with those from other same-sized NBS shakers

General Specifications

There are no General Specifications available.

Additional Specifications

Type/Application: Open Air Shaker
Platform Size: 30" x 18" (76.2 x 45.7 cm)
Max Capacity 250 ml Flasks on Universal Platform: 30
Capacity & Largest Flask Size on Universal Platform: 4 x 6 L
Oribt Diameter (inches): 1
Temperature Range Degrees C: N/A
RPM Range: 50 to 400
Refrigeration: No
Voltage: 120V 50/60 hz

Series Modals

New Brunswick Scientific - E1

[+] View Model Specifications

New Brunswick Scientific - E10

[+] View Model Specifications

New Brunswick Scientific - E2

[+] View Model Specifications

New Brunswick Scientific - E5

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com

Depth	17.9 in
Height	8.5 in
Plate Depth	11 in
Maximum Shaking Speed	400 rpm
Plate Width	13 in
Width	15.8 in
Power Requirements	120V/100 V 50/60 Hz. 230 V 50/60 Hz, 80 VA
Orbital Diameter	0.75 in
Weight	35 lbs
Controls	Analog
Motor	UniCentric™, heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings
Shaking Speed	50 to 400 rpm
Shipping Weight	50 lbs
Shaker Type	Orbital shaker
Additional Model Specifications

Depth	27 in
Height	8.5 in
Plate Depth	18 in
Maximum Shaking Speed	400 rpm
Plate Width	30 in
Timer	Enables programmable shaking periods from 0.1 hr. to 99.9 hrs. Triggers audible alarm and energizes status light at end of period.
Width	30 in
Power Requirements	120V/100 V 50/60 Hz. 230 V 50/60 Hz, 150 VA
Orbital Diameter	1 in
Weight	100 lbs
Controls	Digital
Motor	UniCentric™, heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings
Shaking Speed	50 to 400 rpm
Shaker Type	Orbital shaker
Additional Model Specifications	Control: ±2 rpm PI microprocessor control. Acceleration circuit prevents sudden starts/stops, minimizing both splashing & mechanical damage Alarms: Audible and visual signals indicate when speed deviates more than 5 rpm from setpoint, and when timer operation has expired. (Audible alarm may be muted) LED display: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Setpoint retention: All setpoints and operating status are retained by non-volatile memory. Automatic restart after power is restored. (indicated by flashing display)

Depth	17.9 in
Height	8.5 in
Plate Depth	11 in
Maximum Shaking Speed	400 rpm
Plate Width	13 in
Timer	Enables programmable shaking periods from 0.1 hr. to 99.9 hrs. Triggers audible alarm and energizes status light at end of period.
Width	15.8 in
Power Requirements	120V/100 V 50/60 Hz. 230 V 50/60 Hz, 80 VA
Orbital Diameter	0.75 in
Weight	35 lbs
Controls	Digital
Motor	UniCentric™, heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings
Shaking Speed	50 to 400 rpm
Shipping Weight	50 lbs
Shaker Type	Orbital shaker
Additional Model Specifications	Control: ±2 rpm PI microprocessor control. Acceleration circuit prevents sudden starts/stops, minimizing both splashing & mechanical damage Alarms: Audible and visual signals indicate when speed deviates more than 5 rpm from setpoint, and when timer operation has expired. (Audible alarm may be muted) LED display: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Setpoint retention: All setpoints and operating status are retained by non-volatile memory. Automatic restart after power is restored. (indicated by flashing display)

Depth	17.9 in
Height	8.5 in
Plate Depth	18 in
Maximum Shaking Speed	400 rpm
Plate Width	18 in
Timer	Enables programmable shaking periods from 0.1 hr. to 99.9 hrs. Triggers audible alarm and energizes status light at end of period.
Width	20.5 in
Power Requirements	120V/100 V 50/60 Hz. 230 V 50/60 Hz, 120 VA
Orbital Diameter	0.75 in
Weight	70 lbs
Controls	Digital
Motor	UniCentric™, heavy-duty counterbalanced drive with DC brushless motors and permanently lubricated ball bearings
Shaking Speed	50 to 400 rpm
Shipping Weight	100 lbs
Shaker Type	Orbital shaker
Additional Model Specifications	Control: ±2 rpm PI microprocessor control. Acceleration circuit prevents sudden starts/stops, minimizing both splashing & mechanical damage Alarms: Audible and visual signals indicate when speed deviates more than 5 rpm from setpoint, and when timer operation has expired. (Audible alarm may be muted) LED display: Indicates speed, running time, alarm conditions and temperature. Character height 9/16” (1.4 cm) Setpoint retention: All setpoints and operating status are retained by non-volatile memory. Automatic restart after power is restored. (indicated by flashing display)