Aline - MicroSlide For Cell Culture Analysis
Manufactured by Aline
No Documents
The MicroSlide™ (patent pending) has three separate wells arranged on the microtiter spacing, two for sample and one for control.
The MicroSlide™ (patent pending) has three separate wells arranged on the microtiter spacing, two for sample and one for control. All three wells are supplied by a single inlet, a single outlet carries away the perfusate, while maintaining even flow in each of the wells. Continuous flow into the bottom of each well and out the top helps ensure complete replacement of the well contents.
An optically clear breathable membrane forms the top and bottom of the wells. The unique breathable lid attaches separately, so that attachment dependent cells can be introduced and contained in the wells before setting up the system for flow.
An optically clear breathable membrane forms the top and bottom of the wells. The unique breathable lid attaches separately, so that attachment dependent cells can be introduced and contained in the wells before setting up the system for flow.
Active Questions & AnswersAsk a Question
There are no current Discussions
Glassware Service ProvidersView All (4)
Documents & Manuals
There are no Documents or Manuals available.
Features of MicroSlide For Cell Culture Analysis
- The MicroSlide™ is sealed with a gas permeable membrane * Growth media may periodically be exchanged in the wells without compromising the sterility of the system * Internal fluid membranes eliminate contamination that may be introduced with the growth media * The MicroSlide™ may be used in a standard incubator. * Acrylic body and acrylic optical window bonded with a non-leaching solvent acrylic adhesive * A CO2 permeable film is used to seal the wells once the sample is loaded * 0.45 µm porosity nylon membrane retains non-adherent cells in their respective well, no cross-talk. * Hose barb is Polysulfone
General Specifications
| Depth | 1 in |
| Width | 3 in |
Additional Specifications
Contained volume:
110 µL per well. Channel volume approx.
Pathlength:
3.0 mm
Sterility:
The MicroSlide is available EtO sterilized in a pouch with two inches of silicone tubing on the inlet and outlet as well as a leur-to-hose barb fitting and a 3 cc plastic syring.
Solvent Compatibility:
Ethanol ( up to 99.5%)
Isopropyl alcohol ( up to 91% in water)
Aqueous buffers with or without detergents