1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Incubators
    4.  / 
  4. CO2 Incubator
    5.  / 
  5. PHCBi - MCO-80IC

PHCBi - MCO-80IC

Manufactured by  PHCBi
Follow this Equipment

CytoGROW Reach-IN Incubators

Panasonics large capacity CytoGROW Reach-IN CO2 incubator has the capacity and flexibility to grow with your culturing needs while providing a precise and repeatable temperature, humidity and CO2 environment. The MCO-80IC is ideal for culturing large volumes of biological samples and performing short-term studies. It includes Panasonics exclusive incubator technologies such as InCu-saFe® interiors, ultraviolet decontamination (optional), infrared (IR) CO2 sensor with P.I.D. control, and exceptionally low CO2 gas consumption.
Active Questions & AnswersAsk a Question

There are no current Discussions

CO2 Incubator Service ProvidersView All (28)

Request Support
Features of MCO-80IC
  • Dual Infrared (IR2) Sensors for Optimal CO2 Control
  • InCu-saFe® Copper Stainless Steel Alloy
  • SafeCell UV Protection
  • Direct Heat and Air Jacket System
  • Integrated Microprocessor Control
General Specifications
Depth 33.6 in
Height80.3 in
Internal Depth 27.3 in
Internal Height 60 in
Width 33.8 in
Internal Width 31.7 in
Chamber Volume851 L
CO2 Range0 to 20 %
Weight275 kg
Additional Specifications

OUTER DOOR     
Double paned glass door with heater and outer door latch     
SHELVES     
30.6" x 25.9" (776 x 659 mm)     
ACCESS PORT     
[i]Inner Diameter:[/i] 40 mm (1.57 inch), 2 locations on right and left sides     
INSULATION     
Rigid-polyurethane foamed-in place     
UV LAMP     
Optional      
TEMPERATURE CONTROL RANGE     
Ambient temperature +º5C to 50ºC ([i]ambient temperature:[/i] 20ºC to 35ºC)     
TEMPERATURE UNIFORMITY     
±0.50ºC ([i]ambient temperature:[/i] 25ºC, [i]setting:[/i] 37ºC, [i]CO2:[/i] 5 %, no load)     
MAXIMUM POWER CONSUMPTION     
Max 1752 W      
CO2 CONTROLLER     
PID Control System     
CO2 GAS PRESSURE     
0.1 MPaG (inject):, 15 psiG)     
CO2 VARIATION     
±0.15% ([i]ambient temperature:[/i] 25ºC, [i]setting:[/i] 37ºC, [i]CO2:[/i] 5% no load)     
CO2 SENSOR TYPE     
Dual Infrared Sensor     
DECONTAMINATION METHODS     
24 hr full chamber UV decontamination (SafeCell Ultraviolet Light)     
DISPLAY     
Digital Touchpad     
HUMIDIFYING SYSTEM     
Sharing with interior (SUS304)     
INTERIOR SURFACES     
Stainless steel containing copper

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com