Labconco - Undercounter FlaskScrubber 33 with Viewing Window and Light
Manufactured by Labconco
No Documents
FlaskScrubber Glassware Washers are designed to wash and dry narrow-neck and general purpose labware.
FlaskScrubber Glassware Washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out.
Active Questions & AnswersAsk a Question
There are no current Discussions
Standard Capacity Washers Service ProvidersView All (7)
Documents & Manuals
There are no Documents or Manuals available.
Features of Undercounter FlaskScrubber 33 with Viewing Window and Light
- 18 glassware holders, 36 clips and 10 additional interchangeable small spindles
- LCD information center for customizing cycles and monitoring operation, including internal water temperature (°C or °F)
- Dual pumps, one for washing and one for draining, to reduce potential for cross contamination
- Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses
- Built-in steam generator that produces hot vapour to penetrate and remove dried residue for cleaner glassware
- Manual-fill detergent dispenser for powder or liquid detergent
- Manual-fill rinse aid solution dispenser
- Factory-set cycle programs
- Two user-set cycle programs
- Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH and OVERFLOW, LIQ DETER, RINSE AID, DRAIN FAIL and LOW TEMP.
- User-set delayed start (up to 8 hours)
- One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps
- No center water distribution tower allowing for greater glassware capacity
- 3/8" Female NPT inlet fitting for hot tap water connection
- Two year warranty on parts and labour
General Specifications
There are no General Specifications available.
Series Modals
Labconco - 4420330
[+] View Model Specifications| Depth | 27.4 in |
| Height | 34.1 in |
| Width | 24.1 in |
| Maximum Temperature | 82 °C |
| Power Requirements | 115 V / 60 Hz |
| Weight | 206 lbs |
| Recirculation Pump (flow rate) | 96 gal/min (363 liters/min) |
| Construction | 304 Stainless Steel |
| Drying System | Forced Air |
| Washer Capacity | Standard Capacity |
| Washer Orientation | Undercounter |
| Additional Model Specifications |
Labconco - 4420331
[+] View Model Specifications| Depth | 27.4 in |
| Height | 34.1 in |
| Width | 24.1 in |
| Maximum Temperature | 93 °C |
| Power Requirements | 230 V / 50 Hz |
| Weight | 206 lbs |
| Recirculation Pump (flow rate) | 96 gal/min (363 liters/min) |
| Construction | 304 Stainless Steel |
| Drying System | Forced Air |
| Washer Capacity | Standard Capacity |
| Washer Orientation | Undercounter |
| Additional Model Specifications |
Labconco - 4578130
[+] View Model Specifications| Depth | 27.4 in |
| Height | 32.9 in |
| Width | 24.1 in |
| Maximum Temperature | 82 °C |
| Power Requirements | 115 V / 60 Hz |
| Weight | 206 lbs |
| Recirculation Pump (flow rate) | 96 gal/min (363 liters/min) |
| Construction | 304 Stainless Steel |
| Drying System | Forced Air |
| Washer Capacity | Standard Capacity |
| Washer Orientation | Freestanding |
| Additional Model Specifications |
Labconco - 4578131
[+] View Model Specifications| Depth | 27.4 in |
| Height | 32.9 in |
| Width | 24.1 in |
| Maximum Temperature | 93 °C |
| Power Requirements | 230 V / 50 Hz |
| Weight | 206 lbs |
| Recirculation Pump (flow rate) | 96 gal/min (363 liters/min) |
| Construction | 304 Stainless Steel |
| Drying System | Forced Air |
| Washer Capacity | Standard Capacity |
| Washer Orientation | Undercounter |
| Additional Model Specifications |