1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Glassware Washers
    4.  / 
  4. Standard Capacity Washers
    5.  / 
  5. Labconco - FlaskScrubber Vantage Series Glassware Washer 4540031

Labconco - FlaskScrubber Vantage Series Glassware Washer 4540031

Manufactured by  Labconco
Follow this Equipment

Vantage Series Washers are designed to wash and dry narrow-neck and general purpose glassware and have features for contamination-sensitive research.

FlaskScrubber® Vantage® Series Glassware Washers are designed to wash and dry narrow-neck and general purpose glasssware and have specialized features for contamination-sensitive research. Adjustable cycle programs give the user full control in setting the right combination of water temperature, detergent and rinse aid amounts, wash and rinse times, and number of rinses. Memory stores both factory set and user set programs for reproducible protocols. The RS-232 port provides a means to document settings and actual washing conditions. The unique viewing window with light lets you see each cycle in progress.
Active Questions & AnswersAsk a Question

There are no current Discussions

Standard Capacity Washers Service ProvidersView All (7)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of FlaskScrubber Vantage Series Glassware Washer 4540031

  • 18 glassware holders, 36 clips and 10 additional interchangeable small spindles. 

  • LCD information center for customizing cycles and monitoring operation, including internal water temperature (°C or °F)    

  • Dual pumps, one for washing and one for draining, to reduce potential for cross contamination     

  • Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses 

  • Built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware    

  • Water conductivity monitor to confirm rinse water cleanliness and effective detergent removal     

  • RS-232 port for monitoring washer operation on a user-supplied computer or recorder    

  • Automatic liquid detergent dispenser with peristaltic pump   

  • Automatic rinse aid dispenser     

  • Manual-fill detergent dispenser for powder or liquid detergent     

  • Manual-fill rinse solution dispenser     

  • 10 factory-set cycle programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, SCIENTIFIC, SCIENTIFIC PLUS, INTENSE, INTENSE PLUS, EXTREME, and DRY ONLY • Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH, OVERFLOW, LIQUID DETERGENT and RINSE AID     

  • Two user-set cycle programs     

  • User-set delayed start (up to 8 hours)   

  • LED interior light     

  • One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps     

  • No center water distribution tower allowing for greater glassware capacity    

  • 3/8" IPS inlet fitting for hot tap water connection     

  • Factory-installed drain hose and band clamp     

  • Two year warranty on parts and labor

General Specifications
Depth 27.5 in
Height34.2 in
Width 32.2 in
Maximum Temperature93 °C
Power Requirements 230 V / 50 Hz
Weight294 lbs
Recirculation Pump (flow rate)96 gal/min (363 liters/min)
Construction304 Stainless Steel
Drying SystemForced Air
Washer CapacityStandard Capacity
Washer OrientationFreestanding

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com