SHEL LAB - 3500 Series
Model 3517 CO2 Incubator, IR Sensor, HEPA Filter, Anti-Corrosion Anode, 6.12 Cu.Ft.
Active Questions & AnswersAsk a Question
Shel Lab Model 3517 Co2 Incubator
Recent Questions & Answers
Updated byPohli, Inc.
CO2 Incubator Service ProvidersView All (28)
Documents & ManualsView All Documents
Features of 3500 Series
- Coved Corners for Easy Cleaning
- New Anti-Corrosion Anode for Easy Set-Up & Tap Water Use
- Patented Copper-Housed HEPA Filter for Superior Contamination Prevention
- Built-In CO2 Tank Switcher
- Factory Pre-Set Door Thermostat
- Pre-Heated CO2 Gas Inlet for Increased Temperature Uniformity
- Front-Mounted Connections for Convenience
- 5 Year Limited Warranty
Anti-corrosion Anode The anti-corrosion anode permits the use of distilled or tap water (de-ionized water should not be used). The inclusion of this anode eliminates potential rusting within the water jacket chamber. The anticontamination features make cleaning a breeze and the CO2 sample port has been moved to the front control panel for quick and easy access.
Validation/Documentation Maintain precise time/date stamped records of all incubator functions from one minute to 99 hrs. and 59 min. The 3500 series data logger features programmable outputs that transmit display data via the RS- 232 port, directly to a printer or to a remote alarm system.
New 5 Year SHEL LAB CO2 Incubator Limited Warranty
- 5 Year Parts (Labor Included in the US)
- 7 Year IR Sensor
- Lifetime Water Jacket Chamber
General Specifications
There are no General Specifications available.
Additional Specifications
Weight: 310.00 lbs
Capacity: 6 cu.ft.
Interior Dimensions WxDxH in. (cm): 20.5 x 20 x 25.8 (52 x 50.8 x 65.5)
Exterior Dimensions WxDxH in. (cm): 26 x 26.5 x 39 (66 x 67 x 99)
Incubator Volume cu.ft. (L):6.12 cu.ft. (170 L)
Temperature Range: 8°C above ambient to 60°C
Temperature Uniformity: +/-0.35°C at 37°C
Electrical Specifications:Volts: 120V Hertz: 50/60Hz Watts: 550W Amps: 5A
CO2 Range:0-20%
CO2 Sensor:IR
CO2 Rate: < 5 minutes
Jacket Type: Water
Relative Humidity Range: up to 95%
Shelving:3 Supplied (16 Maximum)
Series Modals
SHEL LAB - 3517
[+] View Model Specifications| CO2 Incubator Type | Water Jacketed |
| Depth | 25.5 in |
| Humidity | Up to 95% |
| Temperature Uniformity | 0.2 °C |
| Height | 40 in |
| Internal Depth | 20 in |
| Internal Height | 25.8 in |
| Width | 26.125 in |
| Internal Width | 20.5 in |
| Power Requirements | 120 V, 60 Hz, % A or 220 V, 50/50 Hz, 3 A |
| Chamber Volume | 6.12 cu. ft. |
| CO2 Sensor | Infrared (IR) |
| CO2 Range | 0 to 20 % |
| Weight | 245 lbs |
| Shipping Weight | 310 lbs |
| CO2 Accuracy | 0.1 % |
| Incubator Orientation | Benchtop |
| Additional Model Specifications | CO2 Recovery Rate to 5%: <5 minutes CO2 Uniformity: ±0.1% @ 5% Alarm conditions: Temperature: ±1°C Fitting Sizes Diameter: Access Port: 1" COs Sample Port: 0.375" CO2 Inlet Port: 0.375" Fill Port: 1" Siphon Port: 0.5" |
SHEL LAB - 3524
[+] View Model Specifications| CO2 Incubator Type | Water Jacketed |
| Depth | 25.5 in |
| Humidity | up to 95% |
| Temperature Uniformity | 0.2 °C |
| Height | 80 in |
| Internal Depth | 20 in |
| Internal Height | 25.8 in |
| Width | 26.125 in |
| Internal Width | 20.5 in |
| Power Requirements | 120 V, 60 Hz, 5 A or 220 V, 50/60 Hz, 3 A |
| Chamber Volume | 6.12 cu. ft. |
| CO2 Sensor | Infrared (IR) |
| CO2 Range | 0 to 20 % |
| Weight | 490 lbs |
| Shipping Weight | 600 lbs |
| CO2 Accuracy | 0.1 % |
| Incubator Orientation | Floor Standing |
| Additional Model Specifications | CO2 Recovery Rate to 5%: <5 minutes CO2 Uniformity: ±0.1% @ 5% Alarm conditions: Temperature: ±1°C Fitting Sizes Diameter: Access Port: 1" COs Sample Port: 0.375" CO2 Inlet Port: 0.375" Fill Port: 1" Siphon Port: 0.5" |