Labconco - Freestanding SteamScrubber
SteamScrubber Glassware Washers are designed to wash and dry general purpose labware.
Active Questions & AnswersAsk a Question
There are no current Discussions
Standard Capacity Washers Service ProvidersView All (7)
Documents & Manuals
There are no Documents or Manuals available.
Features of Freestanding SteamScrubber
Upper rack has additional wash arm and side release latches for easy lift out. Racks accommodate a variety of inserts for holding beakers, culture tubes and other specialty glassware (inserts sold separately)
LCD information center for customizing cycles and monitoring operation, including internal water temperature (°C or °F)
Dual pumps, one for washing and one for draining, to reduce potential for cross contamination
Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses
Built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware
Manual-fill detergent dispenser for powder or liquid detergent
Manual-fill rinse aid solution dispenser
Two user-set cycle programs
Programs may be locked to prevent unauthorized changes
Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH, OVERFLOW, LIQ DETER, RINSE AID, DRAIN FAIL and LOW TEMP.
User-set delayed start (up to 8 hours)
One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps
No center water distribution tower allowing for greater glassware capacity
3/8" Female NPT inlet fitting for hot tap water connection
Factory-installed drain hose and band clamp
General Specifications
There are no General Specifications available.
Series Modals
Labconco - 4400420
[+] View Model SpecificationsDepth | 27.5 in |
Height | 34.2 in |
Width | 24.2 in |
Maximum Temperature | 82 °C |
Power Requirements | 115 V / 60 Hz |
Weight | 235 lbs |
Recirculation Pump (flow rate) | 96 gal/min (363 liters/min) |
Construction | 304 Stainless Steel |
Drying System | Forced Air |
Washer Capacity | Standard Capacity |
Washer Orientation | Freestanding |
Additional Model Specifications |
Labconco - 4400421
[+] View Model SpecificationsDepth | 27.5 in |
Height | 34.2 in |
Width | 24.2 in |
Maximum Temperature | 93 °C |
Power Requirements | 230 V / 50 Hz |
Weight | 235 lbs |
Recirculation Pump (flow rate) | 96 gal/min (363 liters/min) |
Construction | 304 Stainless Steel |
Drying System | Forced Air |
Washer Capacity | Standard Capacity |
Washer Orientation | Freestanding |
Additional Model Specifications |