TECHNOPHAR Equipment and Service - LIQFIL Super Series
The LIQFIL Super Series (F-80, F-120 and F-150) are high-volume, fully-automatic capsule filling machines.
Active Questions & AnswersAsk a Question
There are no current Discussions
Capsule Fillers Service ProvidersView All (12)
Documents & Manuals
There are no Documents or Manuals available.
Features of LIQFIL Super Series
Various dosing units available. * Easy conversion. * Removable filling unit * Highly accurate filling. * Gentle capsule transportation.
Rectification and transportation of capsules: The capsule rotary rectification system available on these machines were developed by Qualicaps and have been patented in 10 countries. During capsule rectification, capsule defects such as "Deformation", "Scratch", and "Peel of imprinted characters" does not occur since no external pressures are applied to capsules.
Separation of capsules: When the body of the capsule reaches the end of the body bushing, an O-ring acts as a shock absorber to avoid cracking of the capsule.
Feed and filling of drug substances: A disk feeder cuts down and supplies fill without stirring, making it possible to supply fixed quantities without changing the particles distribution.
Adjustment of filled quantity: Capsules are filled directly into the body using a mechanical vibration filling method. After pressing in equal density, the fixed quantity is pushed upward from the bottom, the weight is adjusted by scraping the surplus powder out, and the capsule is joined.
Joining: The filled capsule body is lifted upward by the pusher and joined with the cap through the joining block. The joined capsules are lifted over the cap disc by pusher and then discharged.
General Specifications
There are no General Specifications available.
Series Modals
TECHNOPHAR Equipment and Service - F-120
[+] View Model SpecificationsDepth | 1730 mm |
Height | 2360 mm |
Width | 1560 mm |
Power Requirements | 200V |
Weight | 3000 kg |
Process | Automatic |
Throughput | 120000 samples/hr |
Additional Model Specifications | Vacuum Source: Auger Capsule Supply: 15 kPa (1500 mm H20), 1.0 m3 / min Capsule Separate: 20 kPa (2000 mm H20), 1.0 m3 / min Powder Recovery" 15 kPa (1500 mm H20), 1.5 m3 / min Cleaner: 20 kPa (2000 mm H20), 1.5 m3 / min Compressed Air: 0.5 MPa (5 kgf / cm2G), 400 L / min (normal) Production Output: 120,000 capsules/hour Capsule Sizes: 00, 0, 1, 2, 3, 4, 5 Options: Automatic weight control system with length measuring device Capsule weight inspection machine |
TECHNOPHAR Equipment and Service - F-150
[+] View Model SpecificationsDepth | 1730 mm |
Height | 2360 mm |
Width | 1560 mm |
Power Requirements | 200V |
Weight | 3000 kg |
Process | Automatic |
Throughput | 150000 samples/hr |
Additional Model Specifications | Vacuum Source: Auger Capsule Supply: 15 kPa (1500 mm H20), 1.0 m3 / min Capsule Separate: 20 kPa (2000 mm H20), 1.0 m3 / min Powder Recovery" 15 kPa (1500 mm H20), 1.5 m3 / min Cleaner: 20 kPa (2000 mm H20), 1.5 m3 / min Compressed Air: 0.5 MPa (5 kgf / cm2G), 400 L / min (normal) Production Output: 150,000 capsules/hour Capsule Sizes: 00, 0, 1, 2, 3, 4, 5 Options: Automatic weight control system with length measuring device Capsule weight inspection machine |
TECHNOPHAR Equipment and Service - F-80
[+] View Model SpecificationsDepth | 1730 mm |
Height | 2360 mm |
Width | 1560 mm |
Power Requirements | 200V |
Weight | 3000 kg |
Process | Automatic |
Throughput | 80000 samples/hr |
Additional Model Specifications | Vacuum Source: Auger Capsule Supply: 15 kPa (1500 mm H20), 1.0 m3 / min Capsule Separate: 20 kPa (2000 mm H20), 1.0 m3 / min Powder Recovery" 15 kPa (1500 mm H20), 1.5 m3 / min Cleaner: 20 kPa (2000 mm H20), 1.5 m3 / min Compressed Air: 0.5 MPa (5 kgf / cm2G), 400 L / min (normal) Production Output: 80,000 capsules/hour Capsule Sizes: 00, 0, 1, 2, 3, 4, 5 Options: Automatic weight control system with length measuring device Capsule weight inspection machine |