Mendel - MFB-Micro
Manufactured by Mendel
Ideal for very small re-formulation Research & Development batches with a production capacity of as little as 40 grams to 250 grams.
The MFB-Micro fluid bed processor is ideal for very small pre-formulation Research & Development batches with a production capacity of as little as 40 grams to 250 grams.
This machine comes with both top and bottom spray bowls and nozzles, touch screen controls, and a built-in peristaltic pump.
It is constructed from type 316 stainless steel with a pharmaceutical finish. The unit has a working bench and is on castors allowing for easy portability in the lab.
This machine comes with both top and bottom spray bowls and nozzles, touch screen controls, and a built-in peristaltic pump.
It is constructed from type 316 stainless steel with a pharmaceutical finish. The unit has a working bench and is on castors allowing for easy portability in the lab.
Active Questions & AnswersAsk a Question
There are no current Discussions
Fluid Bed Dryers Service ProvidersView All (12)
Documents & ManualsView All Documents
Features of MFB-Micro
- Touch Screen * Inlet, Outlet and Product Temperatures * Blow-Back Pulse Filter Time and Intervals * Bowl Lift and Lower * Batch Record Printer * Top or Bottom Spray Arrangement * Electrical Heater * Differential Pressure Gauges * Atomizing Air Pressure Regulators * Fan Speed * Optional Rotor with control features * Inlet Air Temperature Set Point * Built-in Peristaltic Pump * Lamp
General Specifications
Depth | 1700 mm |
Height | 870 mm |
Width | 700 mm |
Power Requirements | 1.25 Kw |
Weight | 250 kg |
Additional Specifications
Production capacity:
40 grams to 200 grams
Air flow capacity:
145 ft3/min
Total Power Requirement:
1.25 Kw
Static Pressure:
64 inches of water column
Electric heating °C:
To 90 Total
Power Kw:
1.25
Compressed air:
bar 4 to 6
Consumption kg/hr:
.35
Noise:
Less than 63 dB