Hach Company - 5500sc Silica Analyzer

Manufactured by  Hach Company
Follow this Equipment

Silica Analyzer, 1 channel, reagents included 90 Days of Continuous Run Time.

Only two liters of reagent are required for the analyzer to perform unattended for up to 90 days; twice as long as the Series 5000. The industry's only pressurized reagent delivery system eliminates the frequent maintenance associated with pumps. Predictive diagnostic tools, including Hach’s proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the color-coded cap to the sealed reagent bottle and twist gently. Grab Sample In and Grab Sample Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byRick M

Need Equipment Support?

Request Support
Features of 5500sc Silica Analyzer
  • 90 Days of Continuous Run Time
  • Save Time on Maintenance
  • Avoid Downtime
  • Clean, Fast and Easy Reagent Change
  • Verify Easily with Hach Lab Products So You Don't Waste Time Second-guessing
General Specifications
Depth 14.2 in
Flow Rate55 µL/min
Height31.7 in
Width 17.8 in
Maximum Temperature50 °C
Power Requirements 100
Minimum Temperature5 °C
Weight20 kg (36.3 kg) with reagents
Typical Measuring Time Per Sample9.5 min
Additional Specifications

Accuracy:  
0-500 µg/L: ±1% or ±1 µg/L of reading, whichever is greater; 5005000 µg/L: ±5%  
Alarm:  
Four relays output; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum Connection: 18 to 14 AWG wire, 18 AWG stranded recommended  
Certifications:  
CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 ) KC (EN 61326-1: 2006) C-tick (EN 61326-1: 2006) cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)  
Controller Compatibility:  
sc200, sc1000    
Lower Limit of Detection (LOD):    
0.5 µg/L  
Measuring Principle:  
Colorimetric  
No. of Channels:  
1, 2, 4, 6; programmable sequence  
Operating Humidity:  
5 to 95 % non-condensing (indoor use only)  
Operating Temperature Range:    
5 to 45 °C (41 - 113 °F)

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com