Torrey Pines Scientific - HP30 and HS30
Manufactured by Torrey Pines Scientific
Heat, stir and time accurately with the most easy to use, fully-featured hot plates available anywhere.
The EchoTherm HP30 and HS30 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system.
Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.
The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.
HP in model number = hot plate
HS in model number = stirring hot plate
Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.
The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.
HP in model number = hot plate
HS in model number = stirring hot plate
Active Questions & AnswersAsk a Question
There are no current Discussions
Magnetic Stirrers Service ProvidersView All (3)
Documents & Manuals
There are no Documents or Manuals available.
Features of HP30 and HS30
- Extremely easy use by anyone in your lab * Platinum RTD temperature measurement for precision and accuracy * Solid ceramic heater top for quick heating on a flat, white, chemically resistant* Cast aluminum framed ceramic heater top edges stay cooler to prevent burns * PID temperature control for exact, tight sample control of plate or solution * Timer goes up to 99 hours, 59 minutes, 59 seconds with settable * Auto-Off for exactly timed sample preparation * Electronic calibration stored in chip. No batteries to replace * Temperature ramping for exact heating and cooling rates * Strong motor and magnet for stirring most samples * Stir up to 4 liters of aqueous solution from 100-1500 rpm (HS30 and HS30A) * Full-featured digital display for checking all parameters instantly * High and neutral lines fused for safety * UL, CSA and CE certified
General Specifications
There are no General Specifications available.
Additional Specifications
Maximum temperature of the plate surface:
ceramic top - 450°C cast aluminum top - 400°C
Temperature control type:
PID
Temperature accuracy:
1%
Temperature regulation, solution or plate:
±1°C
Heater power in watts:
600 W
Series Modals
Torrey Pines Scientific - HP30
[+] View Model SpecificationsDepth | 15.75 in |
Height | 4.75 in |
Maximum Stirring Quantity | 2 L |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Peak Power | 600 W |
Weight | 12 lbs |
Shipping Weight | 14 lbs |
Top Plate Construction | Ceramic |
Additional Model Specifications |
Torrey Pines Scientific - HP30A
[+] View Model SpecificationsDepth | 15.75 in |
Height | 5 in |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Peak Power | 600 W |
Weight | 13 lbs |
Shipping Weight | 15 lbs |
Top Plate Construction | Aluminum |
Additional Model Specifications |
Torrey Pines Scientific - HS30
[+] View Model SpecificationsDepth | 15.75 in |
Magnetic Stirrer Type | Hot Plate Stirrer |
Height | 4.75 in |
Maximum Stirring Quantity | 2 L |
Maximum Stirring Speed | 1500 rpm |
Stirring Position | Single Position |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Stirring Speed Range | 100 to 1500 rpm |
Peak Power | 600 W |
Weight | 12 lbs |
Shipping Weight | 14 lbs |
Number of Stirring Positions | 1 |
Top Plate Material | Ceramic |
Additional Model Specifications |
Torrey Pines Scientific - HS30A
[+] View Model SpecificationsDepth | 15.75 in |
Magnetic Stirrer Type | Hot Plate Stirrer |
Height | 5 in |
Maximum Stirring Quantity | 2 L |
Maximum Stirring Speed | 1500 rpm |
Stirring Position | Single Position |
Width | 9.125 in |
Maximum Temperature | 450 °C |
Power Requirements | 100, 115, and 230 VAC, 50/60Hz |
Stirring Speed Range | 100 to 1500 rpm |
Peak Power | 600 W |
Weight | 13 lbs |
Shipping Weight | 15 lbs |
Number of Stirring Positions | 1 |
Top Plate Material | Aluminum |
Additional Model Specifications |