Anton Paar - CarboQC

Manufactured by  Anton Paar
Follow this Equipment

The CarboQC is a portable and robust meter for beverage analysis.

CarboQC is the precise CO2 meter which allows reliable QC on finished packages as well as highly accurate measurements in the laboratory for product development. It gives you fast, accurate and reliable determination of dissolved carbon dioxide in beverages. When combined with Anton Paars PFD filling device, sample is taken directly from the package into the measuring chamber of CarboQC - with no loss of dissolved carbon dioxide during sample transfer. CarboQC for the laboratory provides reliable CO2 results, even out of very small packages.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byMarie567

Need Equipment Support?

Request Support
Features of CarboQC

High accuracy, more benefit

  • CO2 measurement based on the patented Multiple Volume Expansion method guarantees repeatability standard deviations of 0.005 vol.
  • No influence of other dissolved gases such as air or nitrogen

Efficient and quick to finish

  • Low sample volume of around 100 mL provides reliable CO2 results, even out of very small packages
  • PFD filling device transfers sample from the package into the measuring chamber without any loss of CO2
  • CO2 results after only 55 seconds
  • Intuitive user interface with clearly arranged navigation of the menu
  • Ready to go once out of the box
  • Clear sample identification for full traceability of 500 measurement results

Built-in support for the most precise results

  • FillingCheck™: automatically detects filling errors and generates a warning message
  • System Check: guides the operator through recommended periodical checks

Modular options for the future

  • Extend or build your own measuring system in the future by connecting a DMA Generation M density meter or Soft Drink Analyzer M (with software release 2.40) with further Anton Paar modules and measure up to seven parameters in one measuring cycle

Fast and wireless

  • Bluetooth interface for wireless printing
  • USB interface for data transfer to a PC
  • RFID interface for changing measurement settings quickly by reading RFID tags
General Specifications
Depth 258 mm
Height170 mm
Width 201 mm
Power Requirements 100 - 240 V, 50/60 Hz,1.5 A
Weight2 kg
Sample SizeApprox. 100 mL
Typical Measuring Time Per Sample90 sec
Additional Specifications

Measuring range:      
0 g/L to 12 g/L (0 vol. to 6 vol.) at 30 °C   
0g/L to 20 g/L (0 vol. to 10 vol.) < 15 °C   
-3 °C to +40 °C (27 °F to 104 °F),   
± 0.2 °C   
0 bar to 10 bar absolute (0 psi to 145 psi)   
Repeatability s.d.   
CO2 0.01 g/L (0.005 vol.)   
Reproducibility s.d.   
CO2 0.05 g/L (0.025 vol.)   
CO2 0.001 g/L   
Sample volume    
approx. 100 mL   
Measuring time per sample    
approx. 55 seconds   
Internal storage    
500 measured results

  • The CarboQC CO2 analyzer

Looking for New or Used Equipment?

Shop on LabX

Shop on