Torrey Pines Scientific - EchoTherm HS65
Manufactured by Torrey Pines Scientific
Programmable 5-Position Stirring Hot Plates
EchoTherm™ HS65 Fully Programmable Digital Stirring Hot Plate is the most advanced and easy-to-use units available. In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Magnetic Stirrers Service ProvidersView All (3)
Documents & Manuals
There are no Documents or Manuals available.
Features of EchoTherm HS65
- 5-stirring positions. All the same speed or each at a separate speed * 10-program memory stored in CMOS. No batteries required * Each program can be 10 steps, where each step includes a temperature, stirring speed, time and heating rate * Repeat any program 1–98 times automatically. Infinite repeats settable * Programmable and non-programmable operation * Platinum RTD temperature measurement for ±1% accuracy * Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface * Temperature ramping for exact heating and cooling rates * PID temperature control to 1°C on plate surface or solution * Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off * Stir 5 - 800 ml of aqueous solutions from 100–1500 rpm * Electronic calibration stored in CMOS * RS232 interface for control or recording data on a computer * Custom display of all parameters all the time * UL, CSA and CE compliant
General Specifications
Depth | 18 in |
Magnetic Stirrer Type | Hot Plate Stirrer |
Height | 4.5 in |
Maximum Stirring Quantity | 800 ml 5 beakers at 800ml |
Maximum Stirring Speed | 1500 rpm |
Plate Depth | 12 in |
Plate Width | 12 in |
Stirring Position | Multi-Position |
Width | 12.5 in |
Maximum Temperature | 400 °C |
Power Requirements | 100, 115 and 230 VAC, 50/60 Hz, |
Stirring Speed Range | 100 to 1500 rpm |
Peak Power | 1450 W |
Weight | 28 lbs |
Shipping Weight | 30 lbs |
Number of Stirring Positions | 5 |
Top Plate Material | Ceramic |
Additional Specifications
Programming:
Memory capacity
10 programs
Individual Program Capacity
10 steps
Repeat a program automatically
1 to 98 times or infinitely
Temperature Measurement:
Platinum RTD
100 ohm at zero in plate and in probe
Range
0–400°C on ceramic plate
Readability
1°C
Hot Plate:
Dimensions
12” (30.5 cm) x 12” (30.5 cm)
Maximum plate temperature
Ceramic: 400°C
Temperature control type
PID
Temperature accuracy
1% ± of reading
Temp stability
1°C
Heater power in watts
1200 watts