Thermo Scientific - Precision Refrigerated Incubator Model 815
Specifically designed for BOD determinations in large labs | Holds over 300 BOD bottles
This refrigerated incubator is specifically designed for labs performing a large number of BOD tests. With a roomy interior chamber of 20 ft3 and 6 interior shelves, this incubator can hold up to 333 standard BOD bottles. Incubator features microprocessor control, push button setpoint selection, high and low temperature protection and an easy to read digital display. Perform calibrations from the front panel using a simple procedure.
Mechanical convection and fully gasketed door provide exceptional uniformity of ±0.5°C at 37°C. The incubator door can be locked to protect your samples.
Includes: Datalogging connector for chart recorder and RS-232 interface, six shelves and 3-ft cord with three-prong plug for 115-VAC operation. Alternate voltages are available (120V 230V).
CSA approved. UL listed.
Active Questions & AnswersAsk a Question
Thermo low temp incubator 815
Recent Questions & Answers
Updated byBritta
Refrigerated Incubator Service ProvidersView All (28)
Documents & ManualsView All Documents
Features of Precision Refrigerated Incubator Model 815
- High and low temperature protection
- Six shelves standard
- RS-232 Capability
- Recorder Jacks
- Gasketed door with key lock
- Front panel calibration
- Microprocessor Controlled
- Access port
- Easy-to-clean, corrosion-resistant construction
- UL listed
General Specifications
Depth | 26 in |
Height | 75 in |
Width | 27.5 in |
Power Requirements | 115V |
Weight | 355 lbs |
Incubator Orientation | Floor Standing |
Additional Specifications
Temperature range: -10 to 50°C
Temperature uniformity @ 37°C: ±0.5°C
Chamber capacity: 300 standard BOD bottles, 20 ft3
Dimensions, chamber: 26.5"W x 57"H x 20"D
Temperature Sensitivity: ±0.1°C
Recovery Time: 10 minutes at 20°C (after 30 second door opening)
Shelves
- Number Supplied: 6
- Total Interior Shelf Area: 15.8 sq. ft