Pharmacia Biotech - Phast system

Manufactured by  Pharmacia Biotech
Follow this Equipment

The Pharmacia Phast electrophoresis system integrates automatic sample applications , electrophoretic separation and...

The Pharmacia Phast electrophoresis system integrates automatic sample applications , electrophoretic separation and staining in one system. This system offers many advantages, such as rapid and reproducible separation and staining; minimal preparation time; low training requirements and versatility.       
     
Pharmacia PhastSystem high speed electrophoresis system The Pharmacia Phast System consists of a Separation-Control unit for system control and electrophoresis, and a Development Unit for gel staining. Electrophoresis is performed on a thermostatic plate capable of maintaining temperatures accurately from 0 to +70 °C. Multi-step programming capability allows gels to be pre run, loaded and run automatically. Controlled parameters include temperature, voltage, current, power, and volt-hours. The whole idea behind the Phast System is extreme ease of use and speedy runs. The stainless steel development unit is capable of processing two gels simultaneously at temperatures from ambient to +50 °C. Up to nine different reagents can be used in a single processing program.       
 
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byDAL

Need Equipment Support?

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Phast system
  • Separation and control unit houses the separation bed and the programmable power supply.       
  • Separation bed can accommodate two gels simultaneously, offering a sample capacity of up to 24 samples,       
  • Cooled or heated accurately in the temperature range 4 to 30C.       
  • Extremely high field-strengths, up to 500V/cm on IEF gels and 120V/cm on SDS gels.      
  • Programming of up to 9 different separation protocols, each with up to 9 program steps.       
  • The stainless steel development chamber can process one or two gels at a time, at temperatures up to 50C.       
  • Rotating gel holder allowing maximum gel exposure and short development times (30-60 minutes).       
  • Voltage range: 10-2000V      
  • Current range: 0.1-50mA      
  • Power range: 0.1-7.0W      
  • Volthour integrator range: 1-9999 volthours/step      
  • Capacity: 1 or 2 gels.      
  • Volume 70ml solution      
  • Number of ports: 9, plus 1 for waste.       
  • Agitation: rotation      
  • Development: Solutions automatically pumped.
General Specifications
Depth 60 cm separation, control and development units
Height28 cm separation, control and development units
Tray Capacity2
Width 76 cm separation, control and development units
Weight9 kg separation, control and development units
Electropheresis TypeGel
Orientation (H/V)Horizontal
Additional Specifications

Separation and Control Unit      
Capacity 1 or 2 gels       
Keyboard 31 keys with audible tone       
Display 40-digit alphanumeric liquid crystal       
LEDs 4 LEDs for status information       
Programmable parameters Voltage, current, power, temperature, duration in volt-hours, sample application and an extra alarm for 9 programs of 9 steps       
Voltage range 10-2000 V       
Current range 0.1-50.0 mA       
Power range 0.1-7.0 W       
Volt-hour integrator range 1-9999 Vh/step       
Separation temperature range 0-70 C       
Alarm Audible alarm at end of separation       
Dimensions (WxDxH) 46 x 30 x 14cm       
Weight 6.2 kg       
Battery back-up Lithium battery       
Safety features Short-circuit protection; protected against power disturbances and static discharges; lid power interlock and alarm      
      
Development Unit       
Capacity 1 of 2 gels       
Volume 80 ml solution       
Number of ports 9, plus 1 for waste       
Agitation Rotation       
Development Solutions automatically pumped       
Programmable parameters Inlet port, outlet port, duration, temperature and an alarm for 9 programs of 20 steps       
Development temp. range Ambient to 50 C       
Dimensions (WxDxH) 30 x 30 x 14 cm       
Weight 4.8 kg

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com