Ocean Optics - HPX-2000
CW Xenon Lamp, 35 W, 185-2000 nm, 1000 hrs
Active Questions & AnswersAsk a Question
There are no current Discussions
UV/VIS Spectrophotometers Service ProvidersView All (32)
Documents & ManualsView All Documents
Features of HPX-2000
- High Power Output. High-intensity source is especially useful for fluorescence
- UV-VIS Range. Covers spectral range of 185-2200 nm
- Integrated Shutter. Conveniently controlled via switch or TTL signal
Also available is the PX-2 Pulsed Xenon Light Source, a high flash rate, short-arc lamp with spectral range of 220-750 nm.
The HPX-2000 has an integrated shutter, which can be driven either by a switch or by a TTL signal. The HPX-2000 also comes equipped with a slot for filters up to 25 mm in diameter or 25-mm square, and up to 14-mm thick.
The HPX-2000 bulb is housed in an easy-to-remove bulb module. If your bulb needs to be replaced, you have two options. You can send the module back to us to replace the bulb, or you can order another bulb module.
General Specifications
Depth | 260 mm |
Height | 145 mm |
Width | 165 mm |
Power Requirements | 60 W AC, 35 W output |
Weight | 5 g |
Wavelength Range | 185 to 2200 nm |
Additional Specifications
Light output stability: ~ 1%
Warm-up time: 25-40 mins
Current: 4 A/DC maximum
Optical Power in 600ยต Fiber: > 150 mW
Time to stabilize: ~ 30 minutes
Optical Fiber Connection: SMA (optional FC/PC; SC...)
Lifetime Average / Guaranteed: 2000h / 1000h
Shutter-Input: TTL-Input, up to maximum 5 Hz
PIN position at SUB-D-15 pin: Shutter PIN 13: TTL / PIN 10: Ground
Filter Dimensions possible: Up to diameter or square 25mm x 4mm or 20 x 6 mm
Input Line: 115 / 230VAC (switchable)
Markings, Directives: CE; VDI/VDE 0160; EN 61010
Input current: 3.5 A