1. Home
    2.  / 
  2. Pharmaceutical Processing
    3.  / 
  3. Test Equipment - Pharma
    4.  / 
  4. Disintegration Tester
    5.  / 
  5. Pharmatest USA - PTZ AUTO 3

Pharmatest USA - PTZ AUTO 3

Manufactured by  Pharmatest USA
Follow this Equipment

Three Position Semi-Automated Dintegration Testing

The PTZ AUTO 3 is a semi-automated tablet disintegration test instrument. It allows the entry and recall of stored methods for both testing positions. The baskets can be started and stopped independently and will be always moved to the upper position outside the disintegration media. With the levels of security and results reporting now specified by FDA regulations, this instrument fulfils all these requirements, yet offers an easy interface for routine use. A print out of the method, medium and results gives a permanent record of the test. All of the PTZ AUTO series of semi automated tablet disintegration test instruments meet the specifications of USP and EP monographs in full.   
   
As with all of the instruments of the PTZ AUTO series it is upgradeable at any time to a fully automated version, with an electronic basket to detect the individual disintegration time of each sample. No need for electric basket lifts either as the PTZ AUTO 3 has this feature as standard.
Active Questions & AnswersAsk a Question

There are no current Discussions

Disintegration Tester Service ProvidersView All (9)

Request Support
Features of PTZ AUTO 3
  • Fully USP and EP compliant   * Tripple station instrument   * GMP comliant stainless steel housing   * Upgradeable to fully-automated operation   * Independent movement of all stations   * Automated lift to raise samples out of the medium at the end of a test   * Automated time log when disintegration is seen   * IQ/OQ documents included free of charge
General Specifications

There are no General Specifications available.

Additional Specifications

Display:    
LCD Display 320x240 Pixel    
Keyboard:    
-numerical keys and function keys    
OQ information:    
programmable time sequence information to perform OQ test    
Security: password protected instrument calibration and validation procedures    
Testing time:    
programmable testing time from 1 second up to 59h, 59m, 59s    
Test Stations:    
PTZ AUTO 3 = 3 baskets, independently operateable    
Thermostat:    
water bath temperature programmable from 25.0° - 45.0° C, overheating protection    
Accuracy:    
± 0.3° C    
Safety System:    
pressure switch to protect the heater from overheating (no liquid flow - no heating - no pumping)    
Thermo switch and thermo fuse to protect the heating system in case of an electronical fault    
Stroke Frequency:    
30 per minute    
Accuracy:    
± 1 stroke    
Stroke Height:    
55 mm    
Accuracy:    
± 1 mm    
Interface:    
1 RS-232 serial interface for external control of the instrument

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com